Table of Contents
Advertisement
rConnecting terminals
1
2
1
<LAN> terminal
This is the LAN terminal to connect to the network.
2
<USB A (VIEWER/WIRELESS)> terminal
When using the Memory Viewer function, attach the USB
memory directly to this terminal. (x page 86)
Please attach the wireless module (Model No.: ET-WML100)
directly to this terminal when using the wireless LAN function.
(x page 91)
3
<USB B (DISPLAY)> terminal
This terminal is used to connect the projector to the computer
with a USB cable when you want to use the USB display
function.
4
<COMPUTER 1 IN> terminal
This is the terminal to input RGB signals, YC
or Y/C signals.
5
<COMPUTER 2 IN/1 OUT> terminal
This is the terminal to input RGB signals or YC
signals. It can also output the signals input from <COMPUTER 1
IN> terminal to an external device.
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Chapter 1 Preparation - About your projector
3
4
7
8
C
/YP
P
signals,
B
R
B
R
C
/YP
P
B
R
B
R
5
9
10
6
<HDMI 1 IN> terminal / <HDMI 2 IN> terminal
These are the terminals to input HDMI signal.
7
<SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control the
projector by connecting a computer.
8
<VIDEO IN> terminal
This is the terminal to input video signals.
9
<AUDIO IN 3 (L/R)> terminal
This is the terminal to input audio signals.
Left input (L) and right input (R) are provided for the <AUDIO IN
3> terminal.
10 <AUDIO IN 1> terminal / <AUDIO IN 2> terminal
These are the terminals to input audio signals.
11 <VARIABLE AUDIO OUT> terminal
This is the terminal to output the input audio signal to the
projector.
6
11
ENGLISH - 23
Advertisement
Chapters
Table of Contents
