Symbol
Appliance status
White bar in the lower area
Function is activated.
Back
confirmed, the menu jumps to the
next higher level.
6.2 Control concept
6.2.1 Activating/deactivating the function
You can activate/deactivate the following functions:
Symbol
Function
Quick Cool
Vacation function
x
When function is on, the appliance works harder. This
means appliance noise when operating may be louder for
a short while, and more energy will be consumed.
u Press the navigation arrows Fig. 5 (1) repeatedly until the
function is displayed.
u Press Confirm Fig. 5 (2).
w You hear the confirmation tone.
w Status appears in the menu.
w Function is on/off.
6.2.2 Selecting function value
With the following functions you can set a value in the
submenu:
Symbol
Function
Setting the temperature
Switch the appliance on/off
u Tap the navigation arrows Fig. 5 (1) repeatedly until the
function is displayed.
u Press Confirm Fig. 5 (2).
u Select the setting value with the navigation arrows
Fig. 5 (1).
Setting the temperature
u Press Confirm Fig. 5 (2).
w You hear the confirmation tone.
w Status: On Fig. 6 (1) appears briefly in the submenu ().
w Display switches back to the menu.
6.2.3 Activating/deactivating settings
You can activate/deactivate the following settings:
Symbol
Setting
Sabbath mode
CareMode
Reminders
Reset
2
* Depending on model and options
When
the
display
is
x
2
2
1
Symbol
Setting
Switch off
u Press the navigation arrows Fig. 5 (1) repeatedly until the
settings
are displayed.
u Press Confirm Fig. 5 (2).
u Tap the navigation arrows Fig. 5 (1) repeatedly until the
desired setting is displayed.
1
Activate setting (shortpress)
u Press Confirm Fig. 5 (2).
w You hear the confirmation tone.
w Status appears in the menu.
w Setting is on / off.
2
Activate setting (longpress)
u To Confirm Fig. 5 (2), press for 3 seconds.
w You hear the confirmation tone.
w Status appears in the menu.
w Display changes.
6.2.4 Selecting the setting value
With the following settings you can set a value in the
submenu:
Symbol
Settings
Brightness
Door alarm
Temp. unit
u Tap the navigation arrows Fig. 5 (1) repeatedly until the
settings appear.
u Press Confirm Fig. 5 (2).
u Tap the navigation arrows Fig. 5 (1) repeatedly until the
desired setting is displayed.
u Press Confirm Fig. 5 (2).
u Select the setting value with the navigation arrows
Fig. 5 (1).
u Press Confirm Fig. 5 (2).
w You hear the confirmation tone.
w Status appears briefly in the submenu.
w Display switches back to the menu.
6.2.5 Go to the Customer menu
You can see the following settings in the Customer menu:
Symbol
Function
ColdFresh
FreezerLevel
*
Software version
u Press the navigation arrows Fig. 5 (1) repeatedly until the
settings
are displayed.
u Press Confirm Fig. 5 (2).
Controls
2
1
1
*
69