NETGEAR EN104TP Installation Manual page 14

RJ-45 Connector
The RJ-45 connector (shown in the illustration with an RJ-45 plug) is used to
connect workstations, hubs, and switches through unshielded twisted pair cable.
The RJ-45 connector accepts four-pair Category 3 or Category 5 UTP cable.
Only two pairs are used for 10BASE-T wiring.
Normal Assignment:
Ports 1–3 on the
Model EN104
RJ-45 Connector
Ports 1–5 on the
Pin Assignment
Model EN106
Ports 1–7 on the
Model EN108
1 Input Receive Data +
2 Input Receive Data -
3 Output Transmit Data +
6 Output Transmit Data -
4, 5, 7, 8 Not used
TP
Model EN104 /EN106
12345678
8
Uplink Assignment:
Port 4 on the
TP
hub Model EN104
Port 6 on the
TP
hub Model EN106
Port 8 on the
TP
hub Model EN108
Output Transmit Data +
Output Transmit Data -
Input Receive Data +
Input Receive Data -
Not used
TP TP
/EN108 Ethernet Hub Installation Guide
1
711EA
TP
hub
TP
hub
TP
hub