NETGEAR DM111PBL Reference Manual page 21

Using ADSL Microfilters with Built-In Splitters. Use an ADSL microfilter with built-in
splitter when there is a single wall outlet that must provide connectivity for both the modem and
telephone equipment.
ADSL
Pho ne
Figure 2-2
Connecting your Modem to your Computer
Before starting the utility, physically connect the modem as follows:
1. Connect the yellow Ethernet cable between the yellow Ethernet port on the modem and the
Ethernet port on your PC.
Note: If you intend to connect to a router, do so after you have successfully obtained
an Internet connection when your modem is directly connected to the PC.
Refer to the documentation that came with the router for its installation
instructions.
2. Connect the ADSL port on your modem to your telephone jack.
Telephone Jack
Figure 2-3
Connecting to the Internet
DM111P ADSL2+ Ethernet Modem Reference Manual
DM111 ADSL2+ Ethernet Modem
v1.0, August 2006
PC Ethernet Port
2-3