Page 2
CLEARANCES MASONRY AND FACTORY BUILT FIREPLACES The minimum required clearances to combustible materials when installed into a masonry or factory built fireplace are listed below. Unit Adjacent Mantle ** Side Minimum Minimum To Top of Unit Side Wall (to Top of Facing Facing Hearth...
Page 3
CSA C22.1. performance. or nuisance conditions. Regency Inserts are designed to use either a 5.5" BEFORE INSTALLING YOUR (140 mm) or 6" (152 mm) flue. INSERT 1. Read all instructions before installing and using In Canada this fireplace insert must be your fireplace insert.
Page 4
The - Blocking cooling air will overheat system. In most cases the flue damper should more you understand the way your Regency Insert the chimney also be removed to allow passage of the liner.
Need help?
Do you have a question about the Cascades I2500 and is the answer not in the manual?
Questions and answers