Table of Contents
Advertisement
Quick Links
Owners &
Installation
LISTINGS AND CODE APPROVALS
These gas appliances have been tested in
accordance with AS4553-2000, NZS 5262
and have been certifi ed by the Australian
Gas Association for installation and opera-
tion as described in these Installation and
Operating Instructions.
Your unit should be serviced annually
by an authorised service person.
Vienns
I43-1 Gas Inbuilt
PLEASE KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE
WARNING:
Improper installation, adjustment, altera-
tion, service or maintenance can cause
injury or property damage. Refer to this
manual. For assistance or additional in-
formation consult an authorised installer,
service agency or the gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other fl am-
mable vapours and liquids in the vicinity of
this or any other appliance.
Installation and service must be performed
by an authorised installer, service agency or
the gas
supplier.
908-058b
Models:
I43-NG1
I43-LPG1
FOR YOUR SAFETY
What to do if you smell gas:
Do not try to light any ap-
pliance
Do not touch any electri-
cal switch: do not use any
phone in your building.
Immediately call your gas
supplier from a neigh-
bour's phone. Follow the
gas supplier's instruc-
tions.
If you cannot reach your
gas supplier, call the fi re
09/12/12
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Regency I43-NG1
Summary of Contents for Regency I43-NG1
- Page 1 Vienns Owners & Installation I43-1 Gas Inbuilt Models: I43-NG1 I43-LPG1 PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE WARNING: FOR YOUR SAFETY Improper installation, adjustment, altera- What to do if you smell gas: tion, service or maintenance can cause Do not try to light any ap- LISTINGS AND CODE APPROVALS injury or property damage.
- Page 2 fi replace, at the fl ick of a switch. The models I43-NG1 and I43-LPG1 of this series have been approved by Warnock Hersey for both safety and effi ciency. As it also bears our own mark, it promises to provide you with economy, comfort, and security for many trouble free years to follow.
-
Page 3: Table Of Contents
Fan Maintenance ..........21 Gas Pressure Test ..........10 Troubleshooting Guide ........22 Aeration System ..........10 Parts List............23 Test For Flue Spillage ........11 Faceplate & Trim Installation ......12 WARRANTY Brick Panels .............13 Log Installation ..........13 Warranty ............27 Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... -
Page 4: Safety Labels
DATA BADGE DATA BADGE NOTE: Regency units are constantly being This is a copy of the label that accompanies each Regency improved. Check the label on the unit and if there is a differ- ULTIMATE Gas Inbuilt Fireplace. We have printed a copy of ence, the label on the unit is the correct one. -
Page 5: Installation Requirements
SAVE THESE INSTRUCTIONS Installation is to be carried out ONLY by an authorised person. The Regency I43-1 Gas Fireplace must be installed in accordance with these instructions. Carefully read all the 1) The appliance shall be installed in accordance with instructions in this manual fi... -
Page 6: Installation Checklist
Make the gas connections and electrical connection for fan and fl ue spill switch. See page 8. The minimum fi replace clearances for the Regency gas inbuilt Install the fl ue or liner to the sliding draft diverter. See page fi... -
Page 7: Clearances To Combustibles
Clearance (My) Non-combustible Hearth Extension (mm) Height (Hy) 0 Depth (Hx) Note: A non-combustible mantel may be installed at a lower height if the framing is made of metal studs covered with a non-combustible board. Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... -
Page 8: System Data Table
The gas line can be rigid ance. The glass must be fi xed in the door when operating. pipe or to make installation easier use a listed fl ex- Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... -
Page 9: Draft Diverter Connection
3m measured horizontally. B-Vent chimneys require a 25mm clearance to combustibles. The Regency Inbuilt incorporates its own internal draft diverter, so no additional external draft diverter is required. Periodically check that the fl ue is unrestricted and an adequate draft is present when the unit is in operation. -
Page 10: Gas Pressure Test
The thermally actuated safety switch will automati- cally reset after it has reduced in temperature. The switch will continue to cycle until the draft problem Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... -
Page 11: Combustion & Ventilation Air
GAS PRESSURE TEST The manifold pressure is controlled by a regulator built into the gas control, and should be checked at the pressure test point. Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... -
Page 12: Faceplate & Trim Installation
4. Once everything is properly lined up you certifi cation on your unit. The faceplate louvres can be can tighten the 4 screws on the faceplate brackets. See purchased separately, part #: 610-909. diagram 5. Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... -
Page 13: Brick Panels
Place the right front log, carefully sliding it down onto the right pins of the front burner. See diagram 3. Distribute the embers along the front burner but do not cover the burner ports and around the logs. See diagram Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... -
Page 14: Door Installation & Door Latches
Close the door. The latch plate must be centered around Note: Preferable if the thermostat is installed on an in- terior wall. Regency offers a programmable thermostat but any CSA, ULC or UL approved millivolt thermostat, 250-750 millivolt rated non-anticipator type thermostat may be used. -
Page 15: Optional Remote Control Installation
FINAL CHECK Before leaving this unit with the customer, the installer must ensure Use the Regency Remote Control Kits approved for this unit. that the appliance is fi ring correctly. This includes: Use of other systems may void your warranty. -
Page 16: Operating Instructions
Open the bottom louvre assembly by turning the wing nut and swinging the louvres out. Push in the gas control knob slightly and turn clockwise to "OFF". Do not force. Disconnect all electric power to the appliance if service is to be performed. Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... -
Page 17: Copy Of The Lighting Plate Instructions
1) Push in the gas control knob slightly and turn clockwise to “OFF”. Do not force. 2) Turn off all electric power to the appliance if service is to be performed. DO NOT REMOVE THIS INSTRUCTION PLATE 908-099a Made in Canada CAUTION H Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... -
Page 18: First Fire
The glass panel may require cleaning after the unit has Fan: cooled down. Regency gas appliances use high tech fans to push heated DO NOT ATTEMPT TO CLEAN THE GLASS WHILE air farther into the room. It is not unusual for the fan to make IT IS HOT. -
Page 19: Maintenance
The heater is fi nished in a heat resistant paint and should Top View of pilot fl ame. only be refi nished with heat resistant paint (not with wall paint). Regency uses Stove Brite Paint - Metallic Black #6309. Incorrect fl ame pattern will have small, probably yellow fl... -
Page 20: Log Replacement
LOG REPLACEMENT The unit should never be used with broken logs. Turn off the Your Regency stove is supplied with high temperature, 5 mm gas valve and allow the unit to cool before opening door to Neoceram ceramic glass that will withstand the highest heat carefully remove the logs. -
Page 21: Fan Maintenance
Caution: Ensure that the wires do not touch a hot surface. should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the ground- ing prong from this plug. Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... -
Page 22: Troubleshooting Guide
• Follow same steps for thermocouple. out. Note: For service technicians only. See the Regency Troubleshooting Guide for more detailed information. (Troubleshooting Regency Gas Products - Part # 908-439.) ABNORMAL OPERATION aava If the main burner does not light but pilot stays on shut down heater and contact your dealer... -
Page 23: Parts List
Side Panel Door Hinge Bracket (Left) 613-522 Side Panel Door Assy (Right) 650-528 Side Panel Door Hinge Bracket (Right) 948-241 Door Latch 910-325 Spill Switch 910-142 Thermodisc - Fan (Auto/On/Off) Mounting Bracket - Fan Switch Regency I43-1 ULTIMATE Gas Inbuilt Fireplace... - Page 24 #54 Orifi ce Front - LPG 904-241 #56 Orifi ce Rear - LPG 910-341 Thermopile 910-048 Pilot Assy S.I.T. - 4 fl ame - NG 910-049 Pilot Assy S.I.T. - 4 fl ame - LPG Regency I43-1 ULTIMATE Gas Inbuilt Fireplace...
- Page 25 Faceplate Trim (Right) - Extra Oversize 105) * Faceplate Trim (Top) - Extra Oversize 106) * Faceplate Trim (Left) Assy-Extra Oversize with Burner Switch and Fan Switch 199) 948-216 Logo Plate (Regency) *Not available as a replacement part. Regency I43-1 ULTIMATE Gas Inbuilt Fireplace...
- Page 26 107) 936-243 Glass Gasket 108) 940-227/P Centre Glass 111) * Door Frame Gasket (Gold door only) 112) 650-236 Door Glass Aluminium Extrusion 113) * Door Frame - Gold Plated (mitred) Door Frame - Black (mitred) Regency I43-1 ULTIMATE Gas Inbuilt Fireplace...
-
Page 27: Warranty
, may nullify your warranty on this product. Regency Fireplace Products, shall in no event be liable for any special, indirect consequential damages of any nature whatsoever which are in excess of the original purchase price of the product. Any alteration to the unit which causes sooting or carboning that results in damage to the exterior facia is not the responsibility of Regency Fireplace Products,. - Page 28 Printed in Canada © Copyright 2012, FPI Fireplace Products International Ltd. All rights reserved.
Need help?
Do you have a question about the I43-NG1 and is the answer not in the manual?
Questions and answers