Page 2
CLEARANCES MASONRY AND FACTORY BUILT FIREPLACES The minimum required clearances to combustible materials when installed into a masonry or factory built fireplace are listed below. Unit Adjacent Mantle ** Side Minimum Minimum To Top of Unit Side Wall (to Top of Facing Facing Hearth...
Page 3
The more you understand into the room through appliance and chimney requirements. the way your Regency Insert operates, the more connector joints. Ensure the heater is installed enjoyment you will experience from knowing that in areas that are not too close to neighbors or The appliance, when installed, must be electrically your unit is operating at peak performance.
Page 4
Failure to follow instructions may result UL 1777 Type HT requirements in property damage, bodily injury or even death. The (2100 more you understand the way your Regency Insert - Reinstall original factory-built operates, the more enjoyment you will experience chimney cap ONLY...
Need help?
Do you have a question about the Classic i2450 and is the answer not in the manual?
Questions and answers