Table of Contents
Advertisement
Before connecting to the mains, make sure that:
The electric meter, safety valve, feeding line and socket are adequate to withstand the maximum load
required (refer to product data label for maximum load).
The supply system earth tested to ensure its working properly.
The isolation switch can easily be reached after the oven is installed.
Never use reductions, shunts, and adaptors as they can cause overheating or burning.
The supply cable is positioned so that it not exposed to temperatures exceed 50°C.
The manufacture shall not liable for any direct or indirect damage caused by faulty installation. The installer must
ensure that the product installation and connection complies with the local and general regulation in force.
Installation Instruction
IMPORTANT! ENSURE THE POWER IS SWITCHED OFF DURING INSTALLATION OR MAINTAINANCE
Built-in Dimensions
Min.10
Page 3
Version 01
Advertisement
Table of Contents
