QUICK START GUIDE
Step 7 - Rectifier Installation
Step 8 - Initial Start Up
Verify that all AC, DC and Controller connections are complete and secure. Turn on AC input breakers. If there are
no alarms, make required adjustments to the default settings on the controller for this installation.
Step 9 - Configure Controller
Verify and edit controller basic configuration parameters per site engineering instructions.
Pulsar Plus - per Galaxy Pulsar Plus Product Manual
Millennium II - per Galaxy Millennium II Controller Users Guide
Page 6
© 2021 ABB. All rights reserved.
closed to fully seat the Rectifier.
Verify the