ABB Infinity S Quick Start Manual page 5

QUICK START GUIDE
Alarm Relay Jumpers Factory
Defaults are Close On Alarm
Step 5 - Set Controller Jumpers
Pulsar Plus
1. Set jumpers 1 thru 10 for the ten alarm relays as Close on Alarm or Open on Alarm; Factory default setting is Open on
Alarm.
Millennium II - See the Galaxy Millennium II Controller Users Guide for details.
Step 6 - Connect Controller Signals
1. Connect per site engineering instructions.
Pulsar Plus - Connect to J1, J2, J3, J4, and J5. See Information Controller Connections.
All controller connections are accessible on the left side of the controller, with the controller installed.
Millennium II - see Galaxy Millennium II Controller Users Guide for details.
Page 5
© 2021 ABB. All rights reserved.
Multi-Pole Adapter Kits - 2 required per breaker
J5 LAN
probes
Controller Jumpers and Connections
J4 Alarm
J3 Alarm
outputs
Inputs
J2 Thermal
probes