Table of Contents
Advertisement
5. Pre-Installation
CPS3200U Installation
Purpose
CPS3200U Shelf Installation guide for generic installations. Additional requirements are needed for
application specific installations. Refer to Appendix A for spacing requirements.
Audience
Field application personnel
Precautions
Read Safety section prior to installation.
Observe ESD protection while installing circuit packs
Safety
•
Always consider personal safety.
•
Make sure the system is properly grounded per the National Electrical Code, local building codes, and any
specific company requirements per standard practice.
•
Remove all metal jewelry before beginning the installation.
Installation Tools
•
A Complete Standard Insulated tool set
•
Wire cutters and strippers
•
Heat shrink gun
•
Torque wrench (0-240 in-lb / 28 Nm)
System Identification
Identify the product you have received. Make sure to select procedural steps to match the product
you have.
Page 21
© 2021 ABB. All rights reserved.
•
Sockets
•
Digital meter, +/- 0.02%
•
Screw Drivers (flat-blade and Phillips)
•
ESD wrist strap
Advertisement
Table of Contents
