ABB Infinity S Quick Start Manual page 4

QUICK START GUIDE
Load Return Connections
(Bus behind Load Connections)
Load Connections
Page 4
© 2021 ABB. All rights reserved.
Distribution
Move plastic slider for Battery or
Load (Battery shown)
Upper Breaker position for Battery
Lower Breaker position for Load
Two multi-pole adapters are required for each multi-pole breaker - figure below.
A + B = 20 for 19" distribution
= 26 for 23" distribution
Direct Battery Connections are on 23" systems only.
Lug Landings
Battery Bus
Correct Breaker orientation for insertion
Return Bus Adapters
Face lug studs to the rear.
Alarm Pin