Figure 26. Removing a cooling fan
Next steps
Replace the cooling
fan.
Installing a cooling fan on 2U sled
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the
sled.
NOTE:
Observe the fan cable routing or make a note of the fan cable routing.
Steps
1. Route the fan cables properly and connect the fan cables to the connectors on the Power Interposer Board (PIB) of the 2U
sled as shown in the image below.
NOTE:
Fans 4, 5, and 6 respectively are connected on the 2U sled interposer board.
Safety
Instructions.
Before working inside your
system.
Installing and removing system components
65