Table of Contents
Advertisement
Table 40. ISCSI Device1 Settings screen details (continued)
Option
Connection 2
Connection 1 Settings
Connection 2 Settings
Connection Order
Integrated Devices
To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Integrated Devices.
Table 41. Integrated Devices details
Option
User Accessible USB Ports
Internal USB Port
iDRAC Direct USB Port
I/OAT DMA Engine
Embedded Video Controller
Description
Enables or disables the iSCSI connection. This option is set to Disabled by default.
Enables you to control the configuration for the iSCSI connection.
Enables you to control the configuration for the iSCSI connection.
Enables you to control the order for which the iSCSI connections will be
attempted.
Description
Configures the user accessible USB ports. Selecting Only Back Ports On
disables the front USB ports; selecting All Ports Off disables all front and
back USB ports. Selecting Only Back Ports On disables the front USB
ports; selecting All Ports Off disables all front and back USB ports; selecting
All Ports Off (Dynamic) disables all front and back USB ports during
POST.Selecting All Ports Off disables all front and back USB ports; selecting
All Ports Off (Dynamic) disables all front and back USB ports during POST.
Selecting All Ports Off disables all front and back USB ports.This option is
set to All Ports On by default. When user accessible USB ports are set to All
Ports Off (Dynamic) the Enable Front Ports Only option is enabled.
● Enable Front Ports Only: Enables or disables the front USB ports during
the operating system runtime.
The USB keyboard and mouse still function in certain USB ports during the
boot process, depending on the selection. After the boot process is complete,
the USB ports will be enabled or disabled as per the setting.
Enables or disables the internal USB port. This option is set to On or Off. This
option is set to On by default.
NOTE:
The Internal USB port is on the PCIe riser 1b.
NOTE:
Internal USB port is only effective for T150, but T350/R350/R250
are not because hardware does not support.
The iDRAC Direct USB port is managed by iDRAC exclusively with no host
visibility. This option is set to ON or OFF. When set to OFF, iDRAC does not
detect any USB devices installed in this managed port. This option is set to On
by default.
Enables or disables the I/O Acceleration Technology (I/OAT) option. I/OAT is
a set of DMA features designed to accelerate network traffic and lower CPU
utilization. Enable only if the hardware and software support the feature. This
option is set to Disabled by default.
Enables or disables the use of Embedded Video Controller as the primary
display. When set to Enabled, the Embedded Video Controller will be the
primary display even if add-in graphic cards are installed. When set to
Disabled, an add-in graphics card is used as the primary display. BIOS will
output displays to both the primary add-in video and the embedded video
during POST and preboot environment. The embedded video will then be
disabled right before the operating system boots. This option is set to Enabled
by default.
NOTE:
When there are multiple add-in graphic cards installed in the
system, the first card discovered during PCI enumeration is selected as
Pre-operating system management applications
39
Advertisement
Table of Contents
