Fluke FIBER OneShot Pro User Manual page 34

FIBER O S
NE HOT
Bulkhead quality
Live fiber detection
P
;
)
Ž
28
P Users Manual
RO
If no fiber is attached or if the connector
is dirty, the troubleshooter displays 0 m or
0 ft.
Detects optical signals at 1310, 1490, and
1550 nm and shows ACTIVE LINE if a
signal is there. Looks for a signal every 3
seconds after the first detection. +7 dBm
maximum input power.
Conforms to relevant European Union
directives
Conforms to relevant Australian
standards
Listed by the Canadian Standards
Association
CSA C22.2 No. 61010.1.04
Conforms to FCC Rules, Part A, Class A