Fluke FIBER OneShot Pro User Manual page 13

E
dB: Shows when you look at the setting for the reflection
limit. The setting is in decibels.
F
dB: Shows when the display shows the reflectance of an
incident on the fiber. The measurement is in decibels.
: Shows when the display shows the power loss of an
incident on the fiber. The measurement is in decibels.
G
RL: Return loss. See page 22.
H
D MORE E: Shows when the troubleshooter finds more
than one incident. Press
numbers show the number of the incident and the total
number of incidents. The troubleshooter shows up to 9
incidents. If there are more than 9 incidents on the fiber,
the last
I
SAVED: Shows after a test. The troubleshooter
automatically saves the test results.
J
TESTING: Shows as the troubleshooter does a test.
K
BREAK OR END: Shows when the troubleshooter shows
the distance to a break or the end of the fiber.
L
: See page 18.
M
RESULT: Shows when you look at saved results. See page
20.
N
Settings for the troubleshooter. LOSS LIMITW and
REFLECTION LIMITW blink if a measurement is equal to or
greater than the limit you select.
9
blinks when you look at the ninth incident.
U V
to see more incidents. The
Physical Features
7