Breville the Smart Scoop BCI600 Instruction Book page 10

NOTE
It is important that the paddle is properly
assembled onto the drive shaft to ensure
ingredients are mixed.
1. To lock the lid into position, align the lid
handle to the alignment graphic, rotating
clockwise into the LOCK position.
2. Press the POWER button to turn the
machine on.
3. Rotate the hardness selection dial
to your chosen dessert.
Press the START | PAUSE button to
begin the churning process. The elapsed
time will be displayed on the LCD.
4. The Smart Scoop will beep when
your dessert has reached its desired
consistency.
10
PRE-COOL
NOTE
PRE-COOL can only be operated in the stand
by mode, before pressing start cancel button
a) PRE-COOL lowers the temperature
of the ice cream machine to reduce the
time it takes to prepare your dessert.
It is optional and is ideal to use while
you are preparing your ice cream base
before churning.
To select PRE-COOL function, press
the PRE-COOL button. The light
surrounding the button will turn from
white to red to indicate that the machine
is in PRE-COOL mode.
This mode will PRE-COOL the machine
to approximately -10°C to -30°C,
taking about 5-10 minutes. READY will
illuminate and PRESS START will flash
on the LCD screen when the ice cream
maker has reached optimal temperature.
The paddle will start turning after 15
minutes has passed, but will not start
making the frozen dessert unless the
START | PAUSE button is pressed.
In this function, the LCD screen will
display the temperature, PRE-COOLING
will illuminate and the progress
indicator will scroll, to let you know that
you are in this mode.
b) PRE-COOL will return to standby after
20 minutes or alternatively can be
switched off either by pressing
PRE-COOL button again or pressing
the START | PAUSE button which will
override the pre-cooling mode.
NOTE
START | PAUSE button will have to be
pressed to start the churning process after
PRE-COOLING.