Configuring Device Alarm - Dahua Technology IVSS User Manual

8.4.2.5 Configuring Device Alarm

Set device alarm. When alarm input device sends an alarm signal to the Device, an alarm is triggered.
● Make sure that the Device is connected with alarm input device.
● The Device supports 16-channel alarm input. Configure according to actual port of alarm input
device. Take ALARM1 port connection for example.
Step 1 Click
Step 2 Select the root node in the device tree on the left.
Step 3 Select Device Alarm > IO1.
Step 4 Click
Step 5 Set parameters.
Figure 8-59 AI report
, or click on the configuration page, and then select EVENT.
Figure 8-60 IO1
to enable local alarm.
267
User's Manual