Email; Preset; Picture Storage - Dahua Technology IVSS User Manual

After the log function is enabled, you can select Maintain > Log > Event Logs on the home page to
search for logs.

8.3.1.4 Email

After you enable the email function, the system sends alarm emails to all added receivers when a
linkage event occurs.
Make sure that the email configuration has been completed. See "8.2.2.3 Email" for detailed
information.
On the alarm configuration page, click Select next to Event Linkage, select Send Email, and then
click Apply.

8.3.1.5 Preset

Set preset function. The system links the selected remote device to rotate to the designated preset
point when a linkage event occurs.
Make sure that the PTZ device has been added, and preset has been added. See "5.5.2 Adding
Remote Devices" for detailed information.
Procedure
Step 1 On the alarm configuration page, click Select next to Event Linkage, and then select
Preset.
Step 2 Select a PTZ device, and then enter the preset number.
Step 3 (Optional) Click
Step 4 Click Apply.

8.3.1.6 Picture Storage

Set the picture storage linkage. When a linkage event occurs, a snapshot is taken and saved on the
Device.
When AI by Camera is used, make sure that the remote device has been configured with snapshot
linkage.
On the alarm configuration page, click Select next to Event Linkage, select Picture Storage, and
then click Apply.
Figure 8-30 Preset
to link multiple PTZ devices to turn to designated presets.
196
User's Manual