Fisher & Paykel ACTIVESMART RF500QNUB1 User Manual page 21

Flushing the water filter
Before you start using the Ice & Water function, complete the flushing steps to ensure
optimum performance of your water filter.
To flush through the water dispenser
To flush the automatic icemaker
1
Empty the water in the bin and return the bin correctly. Ensure that the scoop is located in
front of the bin.
Once your ice maker is turned on, discard the first 3 harvests of ice (8 cubes per harvest).
This will flush away any impurities in the water line and ensure the best ice quality.
Carry out the above steps after a holiday/vacation or extended periods of not using ice.
USING YOUR APPLIANCE
Press the water dispenser pad to dispense 1L
of water.
Wait for 3 minutes before dispensing again.
Repeat this cycle 8 times. At least 8L of
water needs to be flushed through the
system. This prevents excessive dripping of
water from your dispenser.
NOTE: There may be carbon residue
dispensed together with water. This is not
harmful, and normal during flushing process.
Press and hold
4 seconds then close the door(s). The ice
tray will flip twice and empty the water
into the bin below. The ice tray will flip
only after the doors are closed.
Repeat the cycle to help remove any
dust in the ice tray collected during
manufacture and transport.
, and together for
21