Water dispenser*
Dispenser lock button
1
and LED light
Bottle Chill indicator
2
Filter change indicator
3
Drip tray
4
Using your water dispenser
Ensure you have followed the steps outlined in your installation guide prior to your first use
of the water dispenser.
Dispensing
Your water dispenser is designed for one-handed operation.
USING YOUR APPLIANCE
Locks/unlocks the water dispenser. The LED above the lock
button will illuminate when dispenser is locked.
Icon will illuminate when
flashes when the beverage is ready.
Icon will illuminate when water filter requires changing.
The drip tray is designed to fit into the bottom of the water
dispenser panel to capture any odd drips of water that may
fall after dispensing.
To dispense water, gently press the dispensing pad with a glass
or container.
To stop the flow of water, simply pull your glass or container
away from the dispensing pad.
Pressing hard against the dispensing pad will not increase the
flow or dispense more water.
When dispensing for long durations, a time out period may
occur where an alarm will sound. Please wait 3 minutes before
dispensing again.
3
2
1
4
is activated and
BOTTLE CHILL
*Available in Ice & Water models only.
19