Package Contents - NETGEAR ProSafe FSM7352PS Installation Manual

o Secured Shell (SSHv1, v2)
•
Traffic management to better manage traffic flows through your switch
o IEEE 802.1p (Class of Service)
o DiffServ traffic prioritization
o Broadcast Storm Control
o IGMP snooping
o Half-duplex back-pressure control
o Full-duplex IEEE 802.3x pause frame flow control
•
Multiple interfaces to access the management features
o Browser-based Graphical User Interface (GUI)
o Command Line Interface (CLI)
o Telnet or Console
o Standards-based and Private Enterprise SNMP MIBs
•
Automatic hardware configuration on all Ethernet RJ-45 ports
o Auto-sensing and auto-negotiating speed
o Auto Uplink™ on all ports to automatically make the right connection (MDI/MDI-X)
o Full- and half-duplex functions
•
Automatic address learning function to build the packet-forwarding information table. The table
contains up to 16,000 media access control (MAC) addresses (that is, the switch can support
networks with as many as 16,000 devices).
•
Store-and-Forward transmission to remove bad packets from the network
•
LED indicators for monitoring of power, link, activity, and speed
•
IEEE 802.3af power budget: Full power for up to 24 ports, 7 Watts per port for 48 ports
•
Flexible installation:
o Standalone desktop installation
o 19-inch standard rack-mount
•
Standard 1U case size

Package Contents

Figure 1-1 shows the package contents for the Managed Switch.
Page 7 of 24