Appendix C: Default Settings - NETGEAR ProSafe FSM7352PS Installation Manual

APPENDIX C: Default Settings

This appendix provides the default settings for the NETGEAR Model FSM7352PS ProSafe 48+4 Fast
Ethernet L3 Managed Stackable Switch with PoE.
Feature
Port Speed
Port Duplex
Flow Control (half duplex)
Flow Control (full duplex)
Broadcast Storm Control
Gigabit port type
Management IP
Configuration
Password protection
User Name
Password
Web Access
Java Mode
VLAN
IP Multicast Filtering
Spanning Tree Protocol
Admin Edge Port
Link Aggregation
Port Mirroring
Traffic Prioritization
ACL
GVRP
GMRP
IP Routing
RIP
OSPF
MAC address aging
SNMP Community
Stacking Mode
Power Over Ethernet
DHCP Server
FSM7352PS Default Setting
Auto-negotiation
Auto-negotiation
Enabled
Disabled
Disabled
Auto detect
DHCP
Disabled
Admin
(None)
Enabled
Enabled
All ports belong to Default VLAN (VLAN 1) as untagged ports
Disabled
Enabled (IEEE 802.1s)
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
300 seconds
public (read only access), private (read/write access)
Enabled on ports 51 and 52, disabled on all other ports
Enabled
Disabled
Page 25 of 24