Figure 3-4. System Information - NETGEAR ProSafe FSM7352PS Installation Manual

48+4 fast ethernet l3 managed stackable switch with poe

Hide thumbs Also See for ProSafe FSM7352PS:

Table of Contents

5. The login name is "admin". And there is no password assigned. We strongly recommend you enable

password for secure admin access to the switch management function. After successful login, the

screen should show the (FSM7352PS)> prompt. Enter "show sysinfo" to display the management

CPU's IP address. The switch is shipped with DHCP as default to receive its IP address, to manually

set a static IP address for the management VLAN, you must first disable DHCP as follows:

(FSM7352PS) > en

Password: <just hit enter>

(FSM7352PS)# network protocol none

Changing protocol mode will reset ip configuration.

Are you sure you want to continue? (y/n)y

After system prompt return, enter the following command

(FSM7352PS) # network parms 192.168.1.100 255.255.255.0 192.168.1.1

NOTE: This assigns an IP address to the switch in the management VLAN. The management VLAN is a

Figure 3-4. System Information.

Page 17 of 24

Table of Contents