Features - NETGEAR ProSafe FSM7352PS Installation Manual

Features

The following list identifies the key features of the NETGEAR Model FSM7352PS ProSafe 48+4 Fast
Ethernet L3 Managed Stackable Switch with PoE.
•
Forty-eight 10/100Mbps and four 10/100/100 Mbps auto sensing Fast Ethernet TP ports
•
Four SFP modules combo ports for a variety of fiber connections
•
The four gigabit ports can be configured with stacking function to allow up to 8 switches to form a
stack with single management IP address
•
Support for Power-over-Ethernet feature on all 48 10/100Mbps ports based on IEEE 802.3af
standard.
•
Full compatibility with IEEE standards:
o IEEE 802.3i, (10BASE-T)
o IEEE 802.3u (100BASE-TX)
o IEEE 802.3ab (1000BASE-T)
o IEEE 802.3z (1000BASE-X)
o IEEE 802.3x (full-duplex flow control)
•
Full Layer 2 switch management including:
o SNMP v1, v2c, v3
o RMON (groups 1,2,3 and 9)
o IEEE 802.1Q (up to 512 Static VLAN groups)
o IEEE 802.1D (Spanning Tree)
o IEEE 802.1w (Rapid Spanning Tree)
o IEEE 802.1s (Multiple Spanning Trees)
o IEEE802.3ad Link Aggregation (LACP)
o Port Mirroring
o DHCP/Bootp Client for automatic IP address set up
o DHCP server to assign IP address to attached client device
o Configuration file export/import
o TFTP firmware upgrade
•
Layer 3 switch management including:
o RIP I, II
o OSPF v2
o Static IP Routing
o VLAN Routing
o Virtual Router Redundancy Protocol (VRRP)
•
Security to better safeguard your network
o Password Access Control
o IP Access Control List
o MAC Access Control List
o RADIUS Client Support
o Port Access Control
o SNMPv3
o Secure Socket Layer (SSLv3)
o Transport Layer Security (TLSv1)
Page 6 of 24