CAUTION:
Do not remove the module or interrupt the power up process in any way.
The boot process may take several minutes to complete.
You can determine when this process is complete by viewing the SYS
status LED, which slowly flashes in green color when the module is ready.
Figure 4 MIM-OAPS module front panel LEDs and ports
(1) USB port
(3) LINK/ACT LED for the GigabitEthernet port
(4) Standby button
(6) Disk LED (DISK)
2
1
(2) 100/1000Base-T Ethernet port LED
(5) System status LED (SYS)
(7) GigabitEthernet port
5
3
7
6 5 4