Drain Pump Is Blocked - Bosch WGG444E0ID User Manual And Installation Instructions

Clean the measuring aid and cover
2.
with water and brush.
Install the cover back to the
3.
measuring aid. Pay attention to the
assemble mark, and press the cover
until click sounds.
Clean the measuring aid
Note:
regularly to avoid residue and
blockages.

Drain pump is blocked

Turn the water tap off to prevent
Note:
more water from flowing in and to
ensure that it is drained via the pump.
:
Warning
Risk of scalding!
When you wash at high temperatures,
the water gets very hot. If you come into
contact with the hot water, you may be
scalded.
Allow the water to cool down first.
Turn the programme selector to Off.
1.
Pull out the mains plug.
Cleaning and maintenance
Open the service flap.
2.
Take the drain hose out of the
3.
retainer.
Remove the sealing cap and pour
the water out into a suitable
container.
Replace the sealing cap and place
the drain hose back in the retainer.
Carefully unscrew the pump cover;
4.
residual water may leak out.
Clean the interior, pump cover
thread and pump housing. The
impeller in the drain pump must be
able to rotate.
en
39