Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WGG254ZBGR
Summary of Contents for Bosch WGG254ZBGR
- Page 1 Washing machine WGG254ZBGR [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Buttons ........ 22 1.1 General information.... 4 9 Programmes ...... 24 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories...... 28 1.4 Safe installation ...... 5 11 Laundry........ 28 1.5 Safe use ........ - Page 3 15 Basic settings...... 32 15.1 Overview of the basic set- tings........ 32 15.2 Changing the basic set- tings........ 32 16 Cleaning and servicing ... 33 16.1 Cleaning the drum.... 33 16.2 Cleaning the detergent drawer........ 33 16.3 Cleaning the drain pump.. 34 17 Troubleshooting...... 37 17.1 Emergency release ....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Improper repairs are dangerous. ▶ Never make any technical modifications to the appliance or its features. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶... -
Page 10: Preventing Material Damage
en Preventing material damage If the water pressure is too high or Preventing material damage 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least Preventing material damage ATTENTION! 100 kPa (1 bar) and max. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Set the maximum spin speed if you Environmental protection and saving energy 3 Environmental protec- want to dry the laundry in the tumble tion and saving energy dryer afterwards. a The drier the laundry, the shorter Environmental protection and saving energy the programme duration when dry- 3.1 Disposing of packaging... -
Page 12: Installation And Connection
en Installation and connection Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 28 Installation and connection Note: The appliance has undergone 4.1 Unpacking the appliance a function test at the factory. This may cause water stains in the appli- ATTENTION! ance, which the first wash cycle re-... - Page 13 Installation and connection en If the appliance is tilted at an angle 4.4 Removing the transit greater than 40°, residual water may bolts leak out of the appliance and cause material damage. The appliance is secured for trans- Tilt the appliance carefully. portation using transit bolts on the ▶...
-
Page 14: Connecting The Appliance
en Installation and connection Remove the power cable from the Push the 4 cover caps downwards. holder. Note: To install the transit bolts to Remove the 4 sleeves. transport the appliance, perform these steps again in the reverse or- der. 4.5 Connecting the appliance Connecting the water inlet hose Connect the water inlet hose. -
Page 15: Aligning The Appliance
Installation and connection en Open the water tap carefully and Connecting the appliance to the check that the connection points electricity supply are tight. Note: Your electrical domestic install- ation for this appliance must comply Water outlet connection types with the local legal provisions and This information is intended to help safety regulations, and should in- you to connect this appliance to the... - Page 16 en Installation and connection To align the appliance, turn the ap- pliance feet. Check that the appli- ance is level using a spirit level. All appliance feet must stand firmly on the ground. Use a WAF 17 wrench to tighten the lock nuts against the housing until they are hand-tight.
-
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. -
Page 18: Control Panel
en Familiarising yourself with your appliance Measuring aid for liquid deter- gent → "Inserting the measuring aid for liquid detergent", Page 29 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. -
Page 19: Before Using For The First Time
Before using for the first time en Add washing powder containing Before using for the first time 6 Before using for the oxygen bleach to compartment II. first time Prepare the appliance for use. Before using for the first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. -
Page 20: Display
en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. 10 Program end time → "Buttons", Page 22 10.0 Recommendation for the maximum load capacity for the selected program in kg. - Page 21 Display en Display Description Programme status: Spinning Programme status: Programme end Programme status: Steaming ¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ance has been operated. → "Deactivating the childproof lock", Page 32 The crease-reduction function is activated.
-
Page 22: Buttons
en Buttons Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection More information Έναρξη/ ¡ Start Start, cancel or pause the pro- Προσθήκη ρούχων gramme. ¡ Cancel (Start / Reload / ¡ Pause Pause) Speed Perfect ¡... - Page 23 Buttons en Button Selection More information Έξτρα ξέβγαλμα ¡ Activate Activate or deactivate a washing pro- (Water & Rinse gramme with more water and an addi- ¡ Deactivate Plus) tional rinse cycle. Recommended for particularly sensit- ive skin or in regions with very soft water.
-
Page 24: Programmes
en Programmes Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Βαμβακερά Wash hard-wearing items made of cotton, linen or 10.0 (Cottons) blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate Speed Perfect. - Page 25 Programmes en Programme Description Max. load (kg) Programme setting: ¡ Max. 60 °C ¡ Max. 1400 rpm Μεταξωτά Wash delicate, washable items made from silk, vis- (Delicate/Silk) cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag.
- Page 26 en Programmes Programme Description Max. load (kg) Do not use fabric softener. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm Iron Assist Suitable for shirts, T-shirts and similar fabrics made (Easy Ironing from cotton, linen or blended fabrics. Steam Assisted) Programme for warming and steaming dry items using steam in order to hang them up once the programme has ended or to make them easier to...
-
Page 27: Laundry
Programmes en Programme Description Max. load (kg) Use washing powder containing oxygen bleach. Add the washing powder containing oxygen bleach to compartment II for the main wash. → "Detergent drawer", Page 17 Halve the amount of detergent to avoid foaming. Do not use fabric softener. Do not use liquid detergent or detergent that is in- tended for woollens or delicates. -
Page 28: Preparing The Laundry
en Accessories Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 47. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WMZ2381 tension or AquaStop (approx. -
Page 29: Detergents And Care
Detergents and care products en If required, adjust the programme Detergents and care products 12 Detergents and care settings. → "Adjusting the programme set- products tings", Page 29 The manufacturer's instructions for Detergents and care products use and dosage can be found on the 13.3 Adjusting the pro- packaging. -
Page 30: For Liquid Detergent
en Basic operation Press down on the insert and re- Slide the measuring aid forwards. move the detergent drawer. Fold the measuring aid down and Insert the measuring aid. click it into place. Insert the detergent drawer. Push in the detergent drawer. 13.6 Use the measuring aid 13.7 Adding detergent and for liquid detergent... -
Page 31: Starting The Programme
Basic operation en – If the water level is high, start 13.8 Starting the programme the Στύψιμο programme or se- Requirement: A programme is set. lect a suitable programme for → "Setting a programme", Page 29 draining. → "Programmes", Page 24 Press Έναρξη/Προσθήκη ρούχων. ▶ Remove the laundry. a The drum rotates and load detec- → "Unloading the laundry", tion takes place. -
Page 32: Childproof Lock
en Childproof lock Childproof lock Basic settings 14 Childproof lock 15 Basic settings Secure your appliance against being You can configure the basic settings Childproof lock Basic settings operated unintentionally using the for your appliance to meet your controls. needs. 14.1 Activating the childproof 15.1 Overview of the basic lock settings... -
Page 33: Cleaning And Servicing
Cleaning and servicing en Press Στύψιμο and, at the same 16.2 Cleaning the detergent time, turn the programme selector drawer to position 2. Pull out the detergent drawer. a The display shows the current value. Press down on the insert and re- move the detergent drawer. Use the programme selector to se- lect the required basic setting. -
Page 34: Cleaning The Drain Pump
en Cleaning and servicing Fit the insert and click it into place. Open and remove the mainten- ance flap. Clean the opening for the deter- gent drawer. Slide a sufficiently large container under the opening. Push in the detergent drawer. Take the drain hose out of the holder. - Page 35 Cleaning and servicing en Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 34 hot. Since water may remain in the Do not touch the hot detergent ▶...
- Page 36 en Cleaning and servicing Insert the pump cap. Before the next wash Ensure that the parts of the To prevent unused detergent from ‒ pump cap are correctly as- flowing straight into the outlet in the sembled. next wash, run a suitable programme for draining after you have emptied the drain pump.
-
Page 37: Troubleshooting
Troubleshooting en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 38 en Troubleshooting Fault Cause and troubleshooting "E:30 / -80" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
- Page 39 Troubleshooting en Fault Cause and troubleshooting lights up. The temperature is too high. Wait until the temperature has dropped. ▶ Cancel the programme. ▶ → "Cancelling the programme", Page 31 Water level is too high. Select a suitable programme for draining. ▶ → "Programmes", Page 24 flashes.
- Page 40 en Troubleshooting Fault Cause and troubleshooting The programme does Έναρξη/Προσθήκη ρούχων has not been pressed. not start. Press Έναρξη/Προσθήκη ρούχων. ▶ Door is not closed. Close the door. ▶ Childproof lock is activated. Deactivate childproof lock. ▶ → "Deactivating the childproof lock", Page 32 Λήξη...
- Page 41 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Install the water outlet hose at a maximum height of ▶ ing. 1 metre. Pump cover is not correctly assembled. Correctly assemble the pump cover. ▶ Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶...
- Page 42 en Troubleshooting Fault Cause and troubleshooting The programme dura- The unbalanced load detection system eliminates an tion changes during imbalance by repeatedly redistributing the laundry. the wash cycle. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum.
- Page 43 Troubleshooting en Fault Cause and troubleshooting High spin speed not Select the programmes that are suitable for the ▶ reached. type of fabric. Unbalance load detection system is using a reduced spin speed to eliminate an unbalance. Redistribute the laundry in the drum. ▶...
- Page 44 en Troubleshooting Fault Cause and troubleshooting Creasing. The spin speed is too high. The next time you run a wash cycle, set a lower ▶ spin speed. The load is too large. The next time you run a wash cycle, reduce the ▶...
- Page 45 Troubleshooting en Fault Cause and troubleshooting The spin result is not Start the Στύψιμο programme. ▶ satisfactory. The laun- dry is too wet/too damp. Detergent residue on Detergents may contain water-insoluble substances the damp washing. that deposit on the laundry. Start the Ξέβγαλμα programme. ▶...
-
Page 46: Emergency Release
en Transportation, storage and disposal 17.1 Emergency release 18.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 34 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 47: Disposing Of Old Appliance
Customer Service en 18.4 Disposing of old appli- Customer Service 19 Customer Service ance Function-relevant genuine spare parts Customer Service Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 48: Consumption Values
en Consumption values Consumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indic- ative only and were determined in accordance with the applicable standard EN60456. -
Page 49: Technical Data
Technical data en Mains voltage 220-240 V, 50-60 Hz Minimum in- 10 A stallation protec- tion Nominal power 2300 W Power consump- ¡ Off mode: tion 0.10 W ¡ Left-on mode: 0.40 W Water pressure ¡ Minimum: 100 kPa (1 bar) ¡ Maximum: 1000 kPa (10 bar) Length of the wa- 150 cm ter inlet hose Length of the wa-... - Page 52 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.