Bosch WGG244RASN User Manual And Installation Instructiions

Bosch WGG244RASN User Manual And Installation Instructiions

Table of Contents

Advertisement

Quick Links

Washing machine
WGG244RASN
[en]
User manual and installation
instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WGG244RASN

  • Page 1 Washing machine WGG244RASN [en] User manual and installation instructions...
  • Page 2: Table Of Contents

    Futher information and explanations are available online: Table of contents 1 Safety ..........   4 7 Display ........   20 1.1 General information.... 4 8 Buttons ........   23 1.2 Intended use....... 4 1.3 Restriction on user group... 4 9 Programmes .......    25 1.4 Safe installation ...... 5 10 Accessories......
  • Page 3 15 Intelligent dosing system ..   33 15.1 Starting the programme with intelligent dosing sys- tem ......... 33 15.2 Filling the dispensers ..... 34 15.3 Basic dosage ...... 34 16 Basic settings......   36 16.1 Overview of the basic set- tings........ 36 16.2 Changing the basic set- tings........ 37 17 Cleaning and servicing ....
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
  • Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
  • Page 7: Safe Use

    Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous.
  • Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
  • Page 9: Safe Cleaning And Maintenance

    Safety en 1.6 Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff.
  • Page 10: Preventing Material Damage

    en Preventing material damage Make sure that the length of the ▶ 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Follow these instructions to avoid ma- able to operate properly.
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the tumble mediately if they come into contact dryer afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy...
  • Page 12: Installation And Connection

    en Installation and connection Replace the accessories in ques- ▶ 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 29 Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. As a result, water stains may ATTENTION! remain in the appliance.
  • Page 13 Installation and connection en ATTENTION! Installation loca- Requirements If residual water in the appliance tion freezes, this may cause damage to Against a wall Do not trap the the appliance. hoses and power Do not install or operate this appli- ▶ cord between the ance anywhere that is liable to ex- wall and the ap-...
  • Page 14: Connecting The Appliance

    en Installation and connection Unscrew and remove Put on the 4 cover caps. screws for the 4 transit bolts with a WAF 13 wrench. Press down on the 4 cover caps. Remove the power cable from the holder. 4.5 Connecting the appliance Connecting the water inlet hose Remove the 4 sleeves.
  • Page 15: Aligning The Appliance

    Installation and connection en Connect the water inlet hose to a Siphon Secure the con- tap (26.4 mm = 3/4"). nection point with a (24–40 mm) hose clamp. Sink Fix and secure the water outlet hose with an el- → Page 29. When connecting to a 21 mm = ½" Plastic pipe with Fix and secure tap, first fit the adapter with a seal-...
  • Page 16: Connecting The Appliance To The Electricity Supply

    en Installation and connection To align the appliance, turn the ap- The connection details of the appli- pliance feet. Check that the appli- ance can be found under Tech- ance is level using a spirit level. nical data → Page 55. Check the mains plug is inserted properly.
  • Page 17: Familiarising Yourself With Your Appliance

    Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. 5.2 Detergent drawer Maintenance flap for the drain pump → Page 39 Note: Observe the manufacturer's in-...
  • Page 18: Control Panel

    en Familiarising yourself with your appliance Manual dosing compartment : Dispenser for fabric softener : Dispenser for liquid deter- gent 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Programme selector → Page 30...
  • Page 19: Before Using For The First Time

    first time en Add washing powder to the first time 6 Before using for the manual dosing compartment. first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry.
  • Page 20: Display

    en Display 7 Display The display shows the current settings, options or relevant information. Example: Display Display Designation More information 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. "10" / "Ready in" time → "Buttons", Page 23 Recommended The maximum load capacity for the selec-...
  • Page 21 Display en Display Designation More information Rinse Programme status Spin Programme status End of pro- Programme status gramme Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 32 Crease-reduction...
  • Page 22 en Display Display Designation More information 50 ml Basic dosage Basic dosage for detergent or fabric softener. → "Basic dosage", Page 34 Door ¡ Lights up: The door is locked and can- not be opened. ¡ Flashes: The door is not closed prop- erly.
  • Page 23: Buttons

    Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information (Start/Reload) ¡ Start Start, cancel or pause the pro- gramme. ¡ Cancel ¡ Pause ¡ Activate Activate or deactivate a shorter pro- (SpeedPerfect) gramme duration.
  • Page 24 en Buttons Button Selection More information (Prewash) ¡ Activate Activate or deactivate prewash, e.g. for washing heavily soiled laundry. ¡ Deactivate Note: If the intelligent dosing system is activated, the detergent will be dis- pensed automatically for the prewash and the main wash. If the intelligent dosing system is de- activated, place the detergent for the prewash directly in the drum.
  • Page 25: Programmes

    Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cotton Wash hard-wearing items made from cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate Programme setting: ¡...
  • Page 26 en Programmes Programme Description Max. load (kg) ¡ Max. 1400 rpm Delicate/Silk Wash delicate, washable items made from silk, vis- cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag. Programme setting: ¡...
  • Page 27: Laundry

    Programmes en Programme Description Max. load (kg) Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm Automatic 30°C Wash delicate items made from cotton, or synthetic or blended fabrics. Gentle laundry care. The degree of soiling and the type of fabric are automatically detected.
  • Page 28 en Programmes Programme Description Max. load (kg) The programme duration is approx. 30 minutes. If you wish to reduce the programme duration to 15 minutes, activate . The maximum load is re- duced to 2.0 kg. Programme setting: ¡ Max. 40 °C ¡...
  • Page 29: Preparing The Laundry

    – Brush sand out of all collars and scanning the QR code in the table of pockets contents or on www.bosch- – Close bed covers and cushion home.com. covers – Close all zips, Velcro fasteners, 11.1 Preparing the laundry...
  • Page 30: Detergents And Care

    Turn the programme selector to a scanning the QR code in the table ▶ programme. of contents or on www.bosch- a An audible function test is carried home.com. out. ¡ Observe the information on safety → Page 4 and preventing material...
  • Page 31: Loading Laundry

    operation en Notes 13.6 Starting the programme ¡ The programme settings are not Requirement: A programme is set. saved permanently for the pro- → "Setting a programme", Page 30 gramme. ¡ The setting is saved if you activate Press ▶ or deactivate the intelligent dosing a The drum rotates and load detec- system.
  • Page 32: Cancelling The Programme

    en Childproof lock Wipe the rubber gasket dry and re- 13.9 Cancelling the pro- move any foreign objects. gramme Press Open the appliance door. The appliance door remains locked for safety reasons if the temperature and water levels are high. – If the temperature is high, start the Rinse programme.
  • Page 33: Intelligent Dosing System

    Intelligent dosing system en Requirements 15 Intelligent dosing sys- ¡ The laundry is prepared. → "Preparing the laundry", Page 29 ¡ The laundry is sorted. The optimum quantities of liquid de- ¡ The laundry is placed in the appli- tergent and fabric softener are dis- ance.
  • Page 34: Filling The Dispensers

    en Intelligent dosing system Pour liquid detergent and fabric 15.2 Filling the dispensers softener into the relevant dis- If you want to use the intelligent dos- pensers. ing system or if the appliance dis- → "Detergent drawer", Page 17 plays a notification during operation of the appliance, fill the dispensers.
  • Page 35 Intelligent dosing system en To adjust the basic dosage for press ⁠   i-DOS. To adjust the setting, press To end the setting process, wait briefly.
  • Page 36: Overview Of The Basic Settings

    en Basic settings 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme.
  • Page 37: Changing The Basic Set- Tings

    Note: You can find further information gent and fabric softener residue. in the digital instruction manual by Switch off the appliance. scanning the QR code in the table of → "Switching off the appliance", contents or on www.bosch- Page 32 home.com. Pull out the detergent drawer.
  • Page 38 en Cleaning and servicing Press down on the insert and re- Empty the detergent drawer. move the detergent drawer. Clean the pump unit with a damp Remove the pump unit. cloth. Unclip the detergent drawer cover Clean the detergent drawer and and remove it.
  • Page 39: Cleaning The Drain Pump

    Cleaning and servicing en Disconnect the appliance's mains plug from the power supply. Open and remove the service flap. Slide a sufficiently large container under the opening. Clean the housing of the detergent drawer in the appliance. Take the drain hose out of the holder.
  • Page 40 en Cleaning and servicing Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 39 hot. Since water may remain in the Do not touch the hot detergent ▶...
  • Page 41 Cleaning and servicing en Insert the pump cap. Before the next wash Ensure that the parts of the To prevent unused detergent from ‒ pump cap are correctly as- flowing straight into the outlet in the sembled. next wash, run the Drain programme after you have emptied the drain pump.
  • Page 42: Troubleshooting

    en Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 43 Troubleshooting en Fault Cause and troubleshooting "E:36 / -10" Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
  • Page 44 en Troubleshooting Fault Cause and troubleshooting "E:30 / -10" and/or First wait approx. 5 minutes until the drain process ends. To reset the error message, switch the appliance off. Switch the appliance back on. If the error message is displayed again, call cus- tomer service.
  • Page 45 Troubleshooting en Fault Cause and troubleshooting "E:30/-20" Do not add any extra water to the appliance while it ▶ is operating. The appliance is not The mains plug of the power cord is not plugged in. working. Connect the appliance to the power supply. ▶...
  • Page 46 en Troubleshooting Fault Cause and troubleshooting The programme does Push in the detergent drawer until the symbol goes ▶ not start. out. The door cannot The temperature is too high. be opened. Wait until the temperature has dropped. ▶ → "Cancelling the programme", Page 32 ▶...
  • Page 47 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Ensure that the pump cap is screwed in all the way ▶ ing. into the appliance. The handle on the pump cap must be in a vertical position. Water is not flowing You have not pressed ...
  • Page 48 en Troubleshooting Fault Cause and troubleshooting Vibrations and move- Appliance is not correctly aligned. ment of the appliance → "Aligning the appliance", Page 15 ▶ whilst spinning. The appliance feet are not fixed. Secure the appliance feet. ▶ → "Aligning the appliance", Page 15 Transit bolts have not been removed. → "Removing the transit bolts", Page 13.
  • Page 49 Troubleshooting en Fault Cause and troubleshooting The spin programme Drain pipe or water outlet hose is blocked. does not start. Clean the drain pipe and the water outlet hose. ▶ Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are ▶...
  • Page 50 en Troubleshooting Fault Cause and troubleshooting Creasing. The next time you run a wash cycle, reduce the ▶ amount of laundry being loaded. Unsuitable programme for the type of fabric. Select the programmes that are suitable for the ▶ type of fabric. The spin result is not A low spin speed is selected.
  • Page 51 Troubleshooting en Fault Cause and troubleshooting Detergent residue on Drain the dispenser. the damp washing. → "Cleaning the detergent drawer", Page 37 Clean the dispenser. Refill the dispenser. → "Filling the dispensers", Page 34 Basic dosage is not correctly adjusted. If intelligent dosing is activated, reduce the basic ▶...
  • Page 52 en Troubleshooting Fault Cause and troubleshooting Insufficient cleaning. Clean the dispenser. Refill the dispenser. → "Filling the dispensers", Page 34 Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. Connect the water supply hose correctly. → "Connecting the water inlet hose", Page 14 Tighten the screw connection.
  • Page 53: Emergency Release

    → "Installation and connection", in the digital instruction manual by Page 12 and scanning the QR code in the table of → "Starting an empty washing contents or on www.bosch- home.com. cycle", Page 19. Turn off the tap. Empty the water inlet hose. Switch off the appliance.
  • Page 54: Disposing Of Old Appliance

    en Customer Service 19.4 Disposing of old appli- 20 Customer Service ance Function-relevant genuine spare parts Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health!
  • Page 55: Consumption Values

    Consumption values en 21 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. The automatic dosing function has been deactivated for this pur- pose.
  • Page 56 en  Technical data Weight 74.5 kg Maximum load 9.0 kg Mains voltage 220-240 V, 50-60 Hz Minimum in- stallation protec- tion Nominal power 2300 W Power consump- ¡ Off mode: tion 0.15 W ¡ Left-on mode: 0.50 W Water pressure ¡ Minimum: 100 kPa (1 bar) ¡ Maximum: 1000 kPa (10 bar) Length of the wa-...
  • Page 60 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

Table of Contents