Bosch WGG256MMSN User Manual And Installation Instructions

Bosch WGG256MMSN User Manual And Installation Instructions

Table of Contents

Advertisement

Quick Links

Washing machine
WGG256MMSN
[en]
User manual and installation
instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WGG256MMSN

  • Page 1 Washing machine WGG256MMSN [en] User manual and installation instructions...
  • Page 2: Table Of Contents

    Futher information and explanations are available online: Table of contents 1 Safety ..........   4 6 Before using for the first time ...    20 1.1 General information.... 4 6.1 Starting an empty washing cycle ......... 20 1.2 Intended use....... 4 1.3 Restriction on user group... 4 7 Display ........
  • Page 3 13.13 Unloading the laundry .. 32 13.14 Switching off the appli- ance........ 32 14 Childproof lock......   33 14.1 Activating the childproof lock ......... 33 14.2 Deactivating the childproof lock ......... 33 15 Basic settings......   33 16 Cleaning and servicing ....    33 16.1 Cleaning the drum.... 33 16.2 Cleaning the detergent drawer........ 34...
  • Page 4: Safety

    en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
  • Page 5: Safe Installation

    Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
  • Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
  • Page 7: Safe Use

    Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains.
  • Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
  • Page 9: Safe Cleaning And Maintenance

    Safety en 1.6 Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff.
  • Page 10: Preventing Material Damage

    en Preventing material damage Make sure that the length of the ▶ 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Follow these instructions to avoid ma- able to operate properly.
  • Page 11: Environmental Protection And Saving Energy

    Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the tumble mediately if they come into contact dryer afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy...
  • Page 12: Installation And Connection

    en Installation and connection Replace the accessories in ques- ▶ 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 29 Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. As a result, water stains may ATTENTION! remain in the appliance.
  • Page 13 Installation and connection en ATTENTION! Installation loca- Requirements If residual water in the appliance tion freezes, this may cause damage to Against a wall Do not trap the the appliance. hoses between Do not install or operate this appli- ▶ the wall and the ance anywhere that is liable to ex- appliance.
  • Page 14: Removing The Transport Struts

    en Installation and connection Remove the power cable from the Press down on the 4 cover caps. holder. 4.5 Removing the transport Remove the 4 sleeves. struts Unscrew and remove the screws in the vertical transport struts using a T20 screwdriver. Put on the 4 cover caps. Remove the transport struts.
  • Page 15: Connecting The Appliance

    Installation and connection en Undo and remove the screws in Connect the water inlet hose to a the horizontal transport strut using tap (26.4 mm = 3/4"). a T20 screwdriver. When connecting to a 21 mm = ½" Remove the transport strut. tap, first fit the adapter with a seal- ing washer.
  • Page 16: Aligning The Appliance

    en Installation and connection To align the appliance, turn the ap- Siphon Secure the con- pliance feet. Check that the appli- nection point with ance is level using a spirit level. a (24–40 mm) hose clamp. Sink Fix and secure the water outlet hose with an el- → Page 29.
  • Page 17 Installation and connection en The connection details of the appli- ance can be found under Tech- nical data → Page 50. Check the mains plug is inserted properly.
  • Page 18 en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain Transit bolts → Page 13 pump → Page 34 Door...
  • Page 19: Detergent Drawer

    Familiarising yourself with your appliance en 5.2 Detergent drawer Measuring aid for liquid deter- gent → "Inserting the measuring aid for liquid detergent", Page 31 Compartment II: ¡ Detergent for main wash ¡ Water softener ¡ Bleach ¡ Stain remover Compartment ¡ Fabric softener ¡...
  • Page 20: Before Using For The First Time

    en first time Start the first wash cycle or set the first time 6 Before using for the programme selector to to switch off the appliance. first time → "Basic operation", Page 30 Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory.
  • Page 21: Display

    Display en 7 Display The display shows the current settings, options or relevant information. Example: Display display Designation More information 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "10" / "Ready in" time → "Buttons", Page 23 10,0 kg Recommended The maximum load capacity for the selec- load...
  • Page 22 en Display display Designation More information ⁠ Rinse Programme status ⁠ Spin Programme status Pause Programme status End of pro- Programme status gramme ⁠ Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated.
  • Page 23: Buttons

    Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. You can see the selection options for each programme in the overview for → "Programmes", Page 25. Button Selection More information ⁠ (Start/Reload/ ¡ Start Start, cancel or pause the pro- Pause) gramme.
  • Page 24 en Buttons Button Selection More information ⁠ (Easy Iron) ¡ Activate Activate or deactivate the reduced creasing programme. ¡ Deactivate In order to reduce creasing in the laundry, the spin cycle and the spin speed are adapted. The laundry is damp enough after washing that it needs to be hung out on a washing line.
  • Page 25: Programmes

    Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cotton Wash hard-wearing items made from cotton, linen 10,0 or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate ⁠...
  • Page 26 en Programmes Programme Description Max. load (kg) ¡ Max. 1600 rpm Delicate/Silk Wash delicate, washable items made from silk, vis- cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag. Programme setting: ¡...
  • Page 27 Programmes en Programme Description Max. load (kg) Tip: Use the Easy Care programme to wash heavily soiled laundry. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm Duvet Wash pillows or quilts stuffed with synthetic fibres or down fillings. Wash large items separately. Use a detergent that is suitable for down or delic- ates.
  • Page 28: Laundry

    en Programmes Programme Description Max. load (kg) Rapid 15'/30' Wash items made from cotton, or synthetic or blen- ded fabrics. Short programme for small items of lightly soiled laundry. The programme duration is approx. 30 minutes. If you wish to reduce the programme duration to 15 minutes, activate ⁠...
  • Page 29: Preparing The Laundry

    – Brush sand out of all collars and scanning the QR code in the table of pockets contents or on www.bosch- – Close bed covers and cushion home.com. covers – Close all zips, Velcro fasteners, 11.1 Preparing the laundry...
  • Page 30: Detergents And Care

    Notes Note: The lighting for the drum goes ¡ More detailed instructions for use out automatically. can be found on www.bosch- home.com or by scanning the QR 13.2 Setting a programme code on the title page of this user manual. Turn the programme selector and ¡...
  • Page 31: Inserting The Measuring Aid For Liquid Detergent

    operation en Requirement: The laundry is pre- 13.6 Use the measuring aid pared. for liquid detergent → "Laundry", Page 29 To add liquid detergent, you can use Open the door. a measuring aid in the detergent Make sure that the drum is empty. drawer. Place the laundry in the drum. Pull out the detergent drawer.
  • Page 32: Starting The Programme

    en operation Pull out the detergent drawer. Press ⁠ . Pour in detergent. 13.11 Cancelling the pro- → "Detergent drawer", Page 19 If required, add the care product. gramme Push in the detergent drawer. Press ⁠ . Open the appliance door. 13.8 Starting the programme The appliance door remains Note: If you want to change the time locked for safety reasons if the...
  • Page 33: Childproof Lock

    Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.bosch- home.com. 16 Cleaning and servi- Leave the appliance door and de- cing tergent drawer open so that resid- ual water can evaporate.
  • Page 34: Cleaning The Detergent Drawer

    en Cleaning and servicing Fit the insert and click it into place. 16.2 Cleaning the detergent drawer Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer. Clean the opening for the deter- gent drawer. Pull out the insert upwards. Push in the detergent drawer.
  • Page 35 Cleaning and servicing en Open and remove the service flap. CAUTION - Risk of scalding! When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
  • Page 36 en Cleaning and servicing Ensure that both impellers can Cleaning the drain pump turn. Requirement: The drain pump is empty. → Page 34 Since water may remain in the drain pump, unscrew the pump cap carefully. The filter insert in the pump ‒ housing may become stuck due to coarse particles of dirt.
  • Page 37: Cleaning The Intake Opening In The Rubber Gasket

    Cleaning and servicing en Insert and close the service flap. 16.4 Cleaning the intake opening in the rubber gasket Regularly check the intake opening in the rubber gasket for any block- ages and clean the intake opening. Open the appliance door. Remove any blockages from the intake opening.
  • Page 38: Troubleshooting

    en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
  • Page 39 Troubleshooting en Fault Cause and troubleshooting "E:36 / -10" Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 15 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
  • Page 40 en Troubleshooting Fault Cause and troubleshooting ⁠ flashes. Door is not closed. Close the door. Press ⁠ to start the programme. Laundry is caught in the door. Open the door again. Remove any trapped laundry. Close the door. Press ⁠ to start the programme. All other error codes.
  • Page 41 Troubleshooting en Fault Cause and troubleshooting The programme does Remove any trapped laundry. not start. Close the door. Press ⁠ to start the programme. The door cannot The temperature is too high. be opened. Wait until the temperature has dropped. ▶ → "Cancelling the programme", Page 32 ▶...
  • Page 42 en Troubleshooting Fault Cause and troubleshooting Water is not flowing You have not pressed  ⁠ . in. Detergent is not Press ⁠ . ▶ being dispensed. The filters in the water inflow are blocked. Clean the filters in the water inflow. ▶...
  • Page 43 Troubleshooting en Fault Cause and troubleshooting Vibrations and move- Appliance is not correctly aligned. ment of the appliance → "Aligning the appliance", Page 16 ▶ whilst spinning. The appliance feet are not fixed. Secure the appliance feet. ▶ → "Aligning the appliance", Page 16 Transit bolts have not been removed. → "Removing the transit bolts", Page 13.
  • Page 44 en Troubleshooting Fault Cause and troubleshooting The spin programme Note: Where possible, mix large and small items in does not start. the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Spin programme. ▶ Rushing, hissing Water is flushed under pressure into the detergent noise.
  • Page 45 Troubleshooting en Fault Cause and troubleshooting The spin result is not Select the programmes that are suitable for the ▶ satisfactory. The laun- type of fabric. dry is too wet/too Drain pipe or water outlet hose is blocked. damp. Clean the drain pipe and the water outlet hose. ▶...
  • Page 46 en Troubleshooting Fault Cause and troubleshooting Odours have formed Humidity and detergent residue may promote the in the appliance. formation of bacteria. → "Cleaning the drum", Page 33 ▶ If you are not using the appliance, leave the door ▶ and detergent drawer open so that residual water can evaporate.
  • Page 47: Emergency Release

    Note: You can find further information → "Before using for the first time", in the digital instruction manual by Page 20. scanning the QR code in the table of contents or on www.bosch- home.com. Turn off the tap. Empty the water inlet hose.
  • Page 48: Disposing Of Old Appliance

    en Customer Service 18.4 Disposing of old appli- 19 Customer Service ance If you have any queries on use, are Valuable raw materials can be re- unable to rectify faults on the appli- used by recycling. ance yourself or if your appliance needs to be repaired, contact Cus- WARNING tomer Service.
  • Page 49 Customer Service en Make a note of your appliance's de- tails and the Customer Service tele- phone number to find them again quickly.
  • Page 50: Consumption Values

    en Consumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. Programme Load Pro-...
  • Page 51: Technical Data

    Technical data en Minimum in- stallation protec- tion Nominal power 2300 W Power consump- ¡ Off mode: tion 0,10 W ¡ Left-on mode: 0,50 W Water pressure ¡ Minimum: 100 kPa (1 bar) ¡ Maximum: 1000 kPa (10 bar) Length of the wa- 150 cm ter inlet hose Length of the wa- 150 cm ter outlet hose...
  • Page 52 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.

Table of Contents