Table of Contents
Advertisement
7. TECHNICAL DETAILS
Power supply
Chuck
Gear train
No load speed
Clutch
Charger type
Battery type
Charging time
Torque
Acoustic pressure level LpA
Acoustic power level LwA
aw (Vibration)
Information
The declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing one tool with another;
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning!
The vibration emission during actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used.
There is a need to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is running idle in addition to the trigger time).
Wear hearing protection.
20 V d.c.
13 mm keyless
2 Speed
0-500/0-1800 min
21+3 Positions
EZPPB20V2B
Input 220-240V~ 50-60Hz, 65W
Output 21V d.c.,2.5A
EZPPB20V2B
20V d.c. 2.0Ah Lithium-ion
20V d.c. 4.0Ah Lithium-ion
approx. 60 min for 2Ah battery
approx. 120 min for 4Ah battery
60Nm
Drilling:
LpA =78dB(A), Uncertainty: K=5 dB(A)
Impact drilling
LpA =80dB(A) Uncertainty: K=5 dB(A)
Drilling:
L
=88dB(A), Uncertainty: K=5 dB(A)
WA
Impact drilling
L
=91dB(A), Uncertainty: K=5 dB(A)
WA
Drilling:
5.4m/s
2
, K=1.5m/s
Impact drilling
12.1m/s
2
, K=1.5m/s
15
-1
2
.
2
.
Advertisement
Table of Contents
