Operating And Display Elements; Operation - Energizer EZPPB20V2B User Manual

4. OPERATING AND DISPLAY ELEMENTS

4.1 QUICK-RELEASE CHUCK
The quick-release chuck allows insertion of accessories.
4.2 TORQUE ADJUSTMENT RING
The torque adjustment ring adjusts the tightening torque on a scale from 1 to 21.
4.3 FUNCTION SETTING RING
The function setting ring is used to select between the functions drill, screwdriver and impact drill.
4.4 SPEED SWITCH
The speed switch allows switching between speed 1 and speed 2.
4.5 DIRECTION OF ROTATION SWITCH
The direction of rotation switch is used to choose the direction of rotation.
- The arrow pointing towards the quick-release chuck allows a clockwise rotation.
- The arrow pointing from the quick-release chuck allows counterclockwise rotation.
- When in the central position, the direction of rotation switch blocks the on/off switch
4.6 LED WORK LIGHT
The LED work light illuminates the work area. The LED work light is turned on and off with the on/off switch.
4.7 ON/OFF SWITCH
The on/off switch turns on the device. The position of the on/off switch determines the speed of rotation.
The quick-action chuck rotates at a low rotational speed when the insertion depth is small, and rotates at
maximum rotational speed when the insertion depth is maximum.

5. OPERATION

5.1 CHARGING THE BATTERY PACK
IMPORTANT: The battery pack is not fully charged at the factory. Before attempting to charge them,
thoroughly read all of the safety instructions.
1) Assure that the charger you use is applicable to the battery pack.
2)
Insert the charger into 220-240V~, 50-60Hz outlet. The indicator light (15) becomes red to show the
power is connected.
3)
Insert the battery (12) into the slot of charger (14). Make sure the contact with the charger is correct.
4) The indicator light (15) becomes green and will flash when charging.
5) When fully charged the indicator light (15) becomes green.
11