Cleaning And Maintenance - Energizer EZPPB20V2B User Manual

• Drill
1) Mark the desired location.
2) Insert a drill bit.
3) Put the battery in place.
4) Adjust the function setting ring.
5) Press the direction of rotation switch on the arrow pointing to the quick-release chuck.
6) Place the drill straight on the marking.
7) Lightly press the on/off switch to start the device.
8) Press the on/off switch harder to start drilling.
9) To stop drilling, release the on/off switch.
10) When you have finished working, allow the device and the bit to cool completely.
11) Remove the battery.
12) Remove the bit.
• Screw
1) Insert an eartip.
2) Install the battery.
3) Turn the function adjustment ring.
4) Turn the torque adjustment ring.
Start with a low value and increase it if necessary.
5) Set the direction of rotation to the desired direction using the direction of rotation switch.
6) Place the bit straight into the slot(s) in the screw.
7) Lightly press the on/off switch to start the device.
8) If necessary, press the on/off switch harder.
9) To stop screwing, release the on/off switch.
10) When you have finished working, allow the device and the attachment to cool completely.
11) Remove the battery.
12) Remove the cap.
5.7 REMEDY A BLOCKAGE
In the event of a blockage, proceed as follows:
1. If a bit is stuck, release the on/off switch and remove the bit from the drill hole.
2. Check the battery charge status.
• A battery with a low state of charge can cause jamming during drilling. Recharge the battery if necessary.

6. CLEANING AND MAINTENANCE

6.1 CLEANING
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic
parts.
6.2 MAINTENANCE
Our machines have been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper machine care and regular cleaning.
14