Test The Vpn Connection - NETGEAR FVS328 Reference Manual

Figure F-10: NETGEAR FVS328 VPN Policies Menu (Post Configuration)
When the screen returns to the VPN Policies, make sure the Enable check box is selected.
6.
Click the Apply button.

Test the VPN Connection

From a PC behind the NETGEAR FVS318 or FVM318 gateway A attempt to ping the remote
1.
FVS328 gateway B LAN Interface address (example address 172.23.9.1)
From a PC behind the FVS328 gateway B attempt to ping the remote NETGEAR FVS318 or
2.
FVM318 gateway A LAN Interface address (example address 10.5.6.1)
3. Click the Broadband Status link on the left side of the FVS328 Settings management GUI.
Click the Show VPN Status button below. This will take you to the IPSec Connection Status
Screen. If the connection is functioning properly, the State fields will show "Estab."
4. Click the Router Status link on the left side of the FVS318 Settings management GUI. Click
the Show VPN Logs button below. NETGEAR log files should be similar to the example
below.
NETGEAR VPN Configuration FVS318 or FVM318 to FVS328
Model FVS328 ProSafe VPN Firewall with Dial Back-up Reference Manual
May 2004, 202-10031-01
F-9