NETGEAR FVS328 Reference Manual page 95

Select whether enable or disable NAT (Network Address Translation). NAT allows all
b.
LAN computers to gain Internet access via this Router, by sharing this Router's WAN IP
address. In most situations, NAT is essential for Internet access via this Router. You should
only disable NAT if you are sure you do not require it. When NAT is disabled, only
standard routing is performed by this Router.
Configure the WAN Internet Address according to the settings in
c.
click Apply to save your settings. For more information on configuring the WAN IP
settings in the Basic Setup topics, please see
Connection" on page
From the main menu Advanced section, click the LAN IP Setup link.
d.
Configure the LAN IP address according to the settings in
e.
Apply to save your settings. For more information on LAN TCP/IP setup topics, please
see "How to Configure LAN TCP/IP Setup Settings" on page
Virtual Private Networking
Model FVS328 ProSafe VPN Firewall with Dial Back-up Reference Manual
3-14.
May 2004, 202-10031-01
Figure 7-11
"Manually Configuring Your Internet
Figure 7-11
5-3.
above and
above and click
7-21