Ariens Razor Owner's/Operator's Manual page 17

MOWER SET-UP
CAUTION: NEVER operate unit
with rear door open unless grass
bag is in place. Thrown objects
may cause damage or injury.
CAUTION: If clog or obstruction
prevents grass flow, release the
control lever handle and
disconnect spark plug wire before
attempting to clear any clogs.
To Bag Clippings
CAUTION: Grass bag material is
subject to wear and deterioration
under normal usage. Check bag
frequently for necessary
replacement. Replace worn or
damaged bag with Ariens original
equipment replacement bag only.
See Figure 10.
1. Shut off unit.
2. Lift rear door and remove mulch plug, if
necessary.
3. Hook grass bag frame onto bag mount.
There should be no openings between
bagger and mounting surface after installing
bag. If necessary, clear debris from bag
mounting surfaces.
Grass Bag Removal
1. Shut off unit.
2. Use handle to lift and remove grass bag.
3. Install mulch plug (see Figure 10).
4. Close rear door.
NOTICE: Empty grass bag and clean mower
pan after each use. DO NOT allow grass
clumps or a grass coating to collect inside of
grass bag or mower pan. Remove grass bag
from mower, wash bag with hose and allow to
dry.
4
1. Rear Door
2. Bagger
3. Bag Mount
4. Mulch Plug
To Mulch Clippings
See Figure 10.
1. Shut off unit.
2. Remove grass bag if installed.
3. Lift rear door and insert mulch plug.
Make sure lock snaps in place.
There should be no openings between
mulch plug and mounting surface of the
deck.
4. Close rear door.
NOTICE: Rear door must fit tightly against
frame.
EN - 17
1
3
Figure 10
2