Advertisement
12
Press Return soft key three times to go back
to Standby Screen.
13
Power down the device by pressing the Power
button for 3 seconds. Then turn it back on.
You will see the prompt for Phone Password.
Enter the new User password and then press
the OK soft key.
Note: The default password is 0000.
14
Press Menu soft key and then select
SIP Settings.
15
A list of SIP settings will be displayed. Select
Proxy IP and press Edit soft key.
Note: not all settings are necessary.
YML8�2
www.netcomm.com.au
16
Enter the Proxy IP address in the prompt
window and press the Center Selection Key.
Note: Press the * (star) key to switch between the different
modes (Capital letters, small letters and numbers).
17
Move down to Proxy Port and press Edit
soft key. Enter the Proxy Port number in
the prompt window, and press the Center
Selection Key.
18
Move down to Register Proxy IP and press
Edit soft key. Enter the Register Proxy IP
address in the prompt window and press the
Center Selection Key.
Note: Press the * (star) key to switch between the different
modes (Capital letters, small letters and numbers).
V24W Quick Start Guide
V24W Quick Start Guide
Advertisement
