Advertisement
25
Move down to Password and press Edit soft
key. Enter the Password in the prompt window
and press the Center Selection Key.
Note: Press the * (star) key to switch between the different
modes (Capital letters, small letters and numbers).
26
On the SIP Settings screen, select "Return".
27
On the main menu, select Return.
28
A "Ready" message will appear at the top of
the standby screen to indicate that the Phone
is ready for phone calls.
Note: You can disable the phone password settings if you
do not want to enter the password every time you turn on
the device. Change the Enable setting in Phone Settings
> Password Setting from "Yes" to "No". Note you cannot
access the SIP settings when the Password is disabled.
29
The basic installation of the V24W Phone is
now complete.
YML8�2
www.netcomm.com.au
Please refer to the user guide
for other phone usage and
advanced Settings.
V24W Quick Start Guide
V24W Quick Start Guide
11
Advertisement
