Advertisement
6
You will be notified when the IP Phone has
connected to the network, and a checkmark
will appear next to the name of the network.
Press the Exit soft key to go back to the
standby screen.
7
The standby screen will appear.
8
Press the Menu soft key. Then select Phone
Settings.
V24W Quick Start Guide
8
9
Select Phone Password.
10
By default the phone password is disabled.
Enable it by pressing the Edit soft key.
11
Now highlight the User Password and press
Edit soft key to change the key. At the prompt,
enter your new password and press the
Center Selection Key.
Note: please remember the new password. Press the *
(star) key to switch between the different modes (Capital
letters, small letters and numbers).
YML8�2 �2
www.netcomm.com.au
Advertisement
