Table of Contents
Advertisement
10
CAUTION:
DO NOT pinch the outlet hose when inserting it into the "out" connector.
CAUTION:
When removing the tubing, DO NOT pull without first pushing in on the collar,
as this will likely damage the connector.
6. Attach the opposite end of the outlet tube to the MOLLE
strap on the vest using the MOLLE attachment. Attach
the OPC inlet hose to the hook and loop fastener (Fig. 9).
7. After donning the helmet, insert the coiled hose QD
fitting into the CPC connector on the outlet hose (Fig. 10).
PHODS User's Manual
Figure 9
Figure 10
Advertisement
Table of Contents
