Removing & Replacing Oven Door - Frigidaire LGEF3043KF Use & Care Manual

Electric range
Table of Contents

Advertisement

CARE & CLEANING
Removing and replacing the lift-off oven door
• To avoid possible injury when removing or replacing
the oven door, follow the instructions below carefully
and always hold the door with both hands positioned
away from the door hinge area.
• The door is heavy. For safe, temporary storage, lay
the door flat with the inside of the door facing down.
To remove oven door:
1. Open oven door completely (horizontal with floor - See
Fig. 1).
2. Pull the door hinge locks on both left and right door
hinges down from the oven frame completely towards
the oven door to unlock (See Fig. 2). A tool such as a
small flat-blade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle).
4. Close the door to the broil stop position. The oven
door will stop into this position just before fully
closing.
5. With the oven door in the broil stop position lift the
oven door hinge arms over the roller pins located on
each side of the oven frame (see fig. 4)
To replace oven door:
1. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - see fig 3).
2. Holding the oven door at the same angle as the
removal position, sit the hook of the hinge arm over
the roller pins located on each side of the oven door
frame (See Fig. 4). The hook of the hinge arms must
be fully seated onto the roller pins.
3. Fully open the oven door (horizontal with floor - See
Fig. 1).
4. Push the door hinge locks up towards and into the
oven frame for both left and right oven door hinges to
the locked position (See Fig. 2).
5. Close the oven door.
Special door care instructions - Most oven doors
contain glass that can break. Read the following
recommendations:
1. Do not close the oven door until all the oven racks are
fully positioned into the oven interior.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
28
About
Oven
door
Hinge
roller
pin
hinge
arm
Oven door hinge
locations
Fig. 1
Fig. 2
Fig. 3
Fig. 4

Advertisement

Table of Contents
loading

Table of Contents