Related Manuals for HOLMS KHV 280 SMS bracket
Summary of Contents for HOLMS KHV 280 SMS bracket
- Page 1 OPERATOR INSTRUCTION KHV 2,8 / 3,2 / 3,6 Vee-plow From serial no: 5306. Box 924 S-591 29 Motala Tel +46 141 224 100 Fax +46 141 224 190 © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 5/4/06...
- Page 2 • Check that the carrier is appropriate to the attachment (hydraulic flow, stability etc.) When ordering spare parts or by other contacts with Holms or your local dealer, always inform about the attachment type and series No. This number you will find on the machine plate..
- Page 3 © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 5/4/06...
-
Page 4: General Information
Support plate Do not make any modifications, changes, rebuilt work etc. which are not approved by Holms Industri AB. We also ask you to pay attention to spare parts not approved by us. © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 5/4/06... - Page 5 6. Check that the plow is moving free in all positions from the wheel loader wheels. Tilt to increase or decrease the ground pressure. Lift or sink to obtain the right angling to the ground. © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 5/4/06...
-
Page 6: Service And Maintenance
• Always use the quick coupling plugs and put the hose- ends into the holders, when the plough is disconnected to avoid dirt coming into the hydraulic system and to protect the hoses. Connecting selector valve (extra equipment) © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 5/4/06...
Need help?
Do you have a question about the KHV 280 SMS bracket and is the answer not in the manual?
Questions and answers