1. Manuals
  2. Brands
  3. HOLMS Manuals
  4. Tractor Accessories
  5. TKH
  6. Operator's instruction

HOLMS TKH Operator's Instruction

Snow plow 2,4 / 2,8 / 3,2 / 4,0
Hide thumbs

Advertisement

Table of Contents

Operator instruction
TKH / TKHP
Snow plow
2,4 / 2,8 / 3,2 / 4,0
From serial No: 10437
TKH
TKHP
Box 924 S-591 29 Motala Sweden
+46 141-22 41 00
+46 141-22 41 90
Engelska
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 060420.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TKH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HOLMS TKH

Summary of Contents for HOLMS TKH

  • Page 1 TKH / TKHP Snow plow 2,4 / 2,8 / 3,2 / 4,0 From serial No: 10437 TKHP Box 924 S-591 29 Motala Sweden +46 141-22 41 00 +46 141-22 41 90 Engelska © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 060420.

  • Page 3: Table Of Contents

    TKH / TKHP Content Foreword ............3 Product facts ............4 General information..........5 Coupling and setting........6-7 Service and maintenance........8 Important security aspects .........8 © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 060420.

  • Page 4: Foreword

    • Check that the carrier is appropriate to the attachment (hydraulic flow, stability etc.) When ordering spare parts or by other contacts with Holms or your local dealer, always inform about the attachment type and series No. This number you will find on the machine plate.

  • Page 5: Product Facts

    TKH / TKHP © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 060420.

  • Page 6: General Information

    TKH / TKHP General information The snow ploughs TKH/TKHP are designed to be used as atachments for wheel loaders. The two types are equipped with horizontal pendulation, adjustable support plates,hydrau- lic angling with shock absorber valve and spring collapsible cutting edges. The cutting edges are reversible and bolt mounted but can be equipped with cotter bolt montage (extra equipment).

  • Page 7: Coupling And Setting

    5.The tilt function alone shall be used for adjusting the ground pres- sure. The blade's fit-up is adjusted with the lift function (see the fig- ure below). 6.Check that the blade does not collide with the carrier in all posi- tions. © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 060420.
  • Page 8 2. Slowly lower the plough towards the ground and activate the loader floating position. 3. The plough is adjusted by using the tilting function to get the centre pin into vertical position against the ground. © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 060420.

  • Page 9: Service And Maintenance

    • Always use the quick coupling plugs and put the hose-ends into the holders, when the plough is disconnected to avoid dirt coming into the hydraulic system and to protect the hoses. Lubrication points © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 060420.

This manual is also suitable for:

Tkhp

Table of Contents