coMpactor plate
introduction
To get the most out of your new plate
compactor, please read through these
instructions and the attached safety
instructions before use. Please also save
the instructions in case you need to refer to
them at a later date.
The plate compactor is used to compact
soil, gravel or sand during various types
of construction work, for example, laying
flagstones or asphalt.
technical data
Motor output:
Fuel:
95 octane unleaded petrol
Oil type:
Plate dimensions:
Vibrations per minute:
Compression depth:
Centrifugal pressure:
Drive:
Efficiency:
Weight:
Sound pressure, L
: 102.2 dB(A), K
pA
Sound level, L
:
WA
Vibration:
The engine is approved in accordance with
the Euro V emission standard, with type
number:
e13*2016/1628*2016/1628SRA1/P*0076*01
34
6.5 HP
SAE30
50 × 36 cm
5.600
15-20 cm
10.3 kN
20-25 m/min
400-500 m
60 kg
: 3 dB(A)
pA
105.2 dB(A), K
: 3 dB(A)
WA
4-9 m/s
, K: 1.5 m/s
2
The table below shows how long you
may be exposed to vibration every day, if
the vibration load of 2.5 m/s
exceeded:
vibration
2.5 m/s
2
3.5 m/s
2
5 m/s
2
7 m/s
2
10 m/s
2
Special safety directions
The engine is supplied without oil.
Remember to fill with engine oil before use!
The engine uses unleaded fuel. You should
therefore never put leaded petrol, diesel,
paraffin or other fuels in the tank.
Store petrol out of the reach of children and
in a clearly marked, approved container.
Wipe up any spilt petrol with a dry rag after
filling with fuel.
/h
2
Smoking and the use of naked flames
during fuelling should be avoided.
2
is not to be
2
Max. exposure
8 hours
4 hours
2 hours
1 hours
30 minutes