Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Masalta MR85D
Summary of Contents for Masalta MR85D
- Page 1 MR85D EMR85M WARNING...
-
Page 2: Table Of Contents
Contents Introduction…………………………………………………..……………………………………………1 Application ………………………………………………………………………………………..……….2 Operating safety……………………………………………………………………………………..… 2-4 Label locations…………………………………………………………………………………………….4 Safety and Operating Labels …………………………………………………………………….5-6 Prior to Starting the Operation ………………………………………………………………………..7 Operation ………………………………………………………………………………………………… 7-8 Maintenance and Storage………………………………..…………………………………………… 8 Specification ………………………………………………..………………………………………………9 Transportation ………………………………………………….………………………………………9-10 Trouble shooting ……………………………………………….……………………..……………….10-11 Warranty and Maintenance Record ………………………………………….……………………….. 12 EC Declaration ……………………………………………………………………………………………. -
Page 3: Application
NEVER touch hot muffler, engine cylinders, or cooling fins. Burns will result. NEVER use accessories or attachments which are not recommended by MASALTA for rammer. Damage to rammer and/or injury to user may result. NEVER leave a running machine unattended. - Page 4 ventilation is provided. Exhaust gas from the engine contains poisonous carbon monoxide gas; exposure to carbon monoxide can cause loss of consciousness and may lead to death. NEVER tamper with or disable the function of operating controls. NEVER use choke to stop engine. NEVER operate the machine in areas where explosions may occur.
-
Page 5: Label Locations
ALWAYS replace worn or damaged components operating rammer. with spare parts designed and recommended by DO NOT alter engine speeds. Run engine MASALTA for servicing this rammer. only at speeds specified in Technical Data Section. Label Location... -
Page 6: Safety And Operating Labels
Safety and Operating Labels MASALTA machines use international pictorial labels where needed. These labels are described as below: Label Meaning This model-in label contains important safety and operating information. If it becomes illegible, the cover must be replaced. Refer to the Parts Manual for ordering information. - Page 7 Label Meaning WARNING! Hot surface! CAUTION! For optimal control, performance, and minimal hand/arm vibration, grasp handle as shown. CAUTION！ Do not lay down! WARNING! Serious injury if struck by compressed spring or cover. If the spring system cover is removed improperly, the springs can eject.
-
Page 8: Prior To Starting The Operation
Prior to Starting the Operation Check the oil level through a window at rear end of the foot. Replenish oil if oil is not visible at the window. For lubrication, use automobile engine oil of 10W-30 SE, SF or better grade. Capacity is 830cc. -
Page 9: Maintenance And Storage
greater causing the tamping rammer to perform somewhat irregular movement. Therefore, it is recommended to perform warm-up run while moving the throttle lever repeatedly between ON and OFF positions, before entering the work. 5. Soil contacting surface of the foot is lined with heat-treated metal sheet for extra strength. However, for compacting cobblestone, use the filling-up soil for example so that the foot hits the soil uniformly. -
Page 10: Specification
Specification Rammer Model MR85D EMR85M Motor YANMAR L48N MASALTA M48D DIESEL ENGINE Power kW (hp) 3.5 (4.76) 2.72 (3.7) Operation Mass kg (lb) 88 (194) 88 (194) Impact Force kN 18KN 17KN Jumping Stroke mm 40-80 (1.6-3.1) 40-80 (1.6-3.1) Fuel Tank Capacity l Shoe Size mm 330x285 (13.0x11.2) -
Page 11: Trouble Shooting
machine for weight). Use central lifting point (a) when lifting machine. 7. Use trolley kit (supplied as optional) for short distance transportation. 8. Do not lay down during transportation. （ ） Troubleshooting Guide A. Rammer Troubleshooting SYMPTOM POSSIBLE PROBLEM SOLUTION Operating speed of throttle Set throttle lever to correct position. - Page 12 SYMPTOM POSSIBLE CAUSE SOLUTION Indicator Stays On – Key Switch is Turned from Start to ON (START→ON) Engine oil pressure See authorized industrial Faulty engine oil pressure switch indicator stays On engine dealer or distributor Engine Does Not Start No diesel fuel Refuel fuel system Replace with recommended Improper diesel fuel...
-
Page 13: Warranty And Maintenance Record
WARRANTY MASALTA products are covered by warranty for a period of six (6) months from the date of purchase against defects in material or workmanship provided that: The product concerned has been operated and maintained in accordance with the operating ... -
Page 14: Ec Declaration
CE-KONFORMITÄTSERKLÄUNG DECLARACIÓN DE CONFORMIDAD DE LA CE DÉCLARATION DE CONFORMITÉ C.E. MASALTA ENGINEERING CO., LTD 20 Dalian Road, Baohe Industrial Estate, HeFei 230051, China HEREBY CERTIFIES THAT THE CONSTRUCTION EQUIPMENT SPECIFIED HEREUNDER / BESCHEINIGT, DA. DAS BAUGER.T / CERTIFICA QUE LA MÁQUINA DE CONSTRUCCIÓN / ATTESTE QUE LE MATÉRIEL : CATEGORY / ART / CATEGORÍA / CATÉGORIE:... - Page 15 Distributed By MASALTA ENGINEERING CO., LTD Add: 20Dalian Road, Baohe Industrial Estate, Hefei 230051, Tel: 86-551-64846601 Fax: 86-551-64846616 E-mail: sales@masalta.com.cn, masalta@mail.hf.ah.cn Http://www.masalta.com.cn Version: 01/11/01...
Need help?
Do you have a question about the MR85D and is the answer not in the manual?
Questions and answers