Coleman 5100 LP Gas Series Assembly Manual page 10

Step
3
3-A
2-A. Carefully turn the grill Up-Side-Down.
Locking Casters
3-A. Check that all fasteners are tightened before turning the
grill Right-Side-Up.
Carefully turn the grill Right-Side-Up.
Engage the Locking Casters to prevent movement during
the rest of the assembly process.
Step
4
Hardware shown actual size
(AV)
M5 x 10mm Screw
(2) Qty.
10
NOTE: Use a ground cloth
to protect the paint finish
during this step.
(BW)
M5 Locking Hex Nut
(2) Qty.
4-A
AV (x2)
Electronic Module
4-A. Attach the Electronic Module to the Left Panel on the
inside surface. Use two screws (AV) and two locking hex
nuts (BW).
4-B
Hardware shown actual size
(VP)
Self Tapping Screw
(1) Qty.
4-C
BW (x2)
4-B. Assemble the Cylinder
Retaining Bolt to the
Cylinder Support.
4-C. Assemble the Cylinder
Support to the Base by
engaging the tabs in
the slots. Secure the
support with one screw
(VP).
VP
Cylinder Support