Coleman 5100 LP Gas Series Assembly Manual page 15

Step
10
10-A
TN (x3)
10-A. LOOSELY fasten the right side of the Firebox to the Grill Cart with three
Screws (TN), two Flat Washers (DY) and two Locking Hex Nuts (UO).
NOTE: You will tighten these screws LATER (after Step 10-B), after the left
side of the Firebox is attached to the Grill Cart (this helps with alignment).
Fasten the Firebox to the
Grill Cart.
DY (x2)
10-B
DY (x2)
UO (x2)
10-B. Fasten the left side of the Firebox to the Grill Cart with three Screws
(TN), two Flat Washers (DY) and two Locking Hex Nuts (UO).
Tighten all fasteners.
Hardware shown actual size
(TN)
M6 x 15mm Screw M6 Flat Washer
(6) Qty.
UO (x2)
(UO)
(DY)
M6 Locking Hex Nut
(4) Qty.
(4) Qty.
TN (x3)
15