Advertisement
Setup > DMX
Overview
One universe (512 channels) of DMX allows control of DMX/RDM fixtures
1. If you have RDM capable DMX
devices already connected to the
station they will appear here
2. If you need to manually add DMX
devices press
<Tap to add DMX>
devices
1. After pressing
choose the DMX fixture type that
best matches the profile required
2. Choose the DMX start address
3. Next select the ZONE that it will be
assigned to
4. If you know the exact fixture ID
listed within the Horizon DMX fixture
library (provided upon request)
choose OTHER and enter the fixture
ID and enter the DMX start address
and zone output for assignment
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. 08/17/15
<Tap to add DMX>
20 of 27
Advertisement
Need help?
Do you have a question about the Fresco Touchscreen and is the answer not in the manual?
Questions and answers
Panel is frozen
To fix a frozen Acuity Controls Fresco Touchscreen panel, you can perform a system reboot using the RESET function. This can be accessed in the Setup > About section of the system menu.
This answer is automatically generated
How do we separate ballroom 1 and 2 on the Touchscreen?