Advertisement
Setup > nLight® (continued)
Overview
Add up to 128 supported nLight devices to each fresco station for control
1. If the nLight device was auto
identified or you manually entered it
you now need to set it up*
2. Press the (+) next to the device to
expand the device settings
3. You can change the NAME of the
device
4. SERIAL should be populated already.
If it is not press UNASSIGNED and
choose it from the list of available
serial numbers that match the device
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. 08/17/15
*TIP for UNKNOWN devices
If the station auto discovers an
nLight device and appears as
UNKNOWN, REMOVE the device
and manually enter the device
18 of 27
Advertisement
Need help?
Do you have a question about the Fresco Touchscreen and is the answer not in the manual?
Questions and answers
Panel is frozen
To fix a frozen Acuity Controls Fresco Touchscreen panel, you can perform a system reboot using the RESET function. This can be accessed in the Setup > About section of the system menu.
This answer is automatically generated
How do we separate ballroom 1 and 2 on the Touchscreen?