Advertisement
Lights On
Overview
"Lights On" is what you will see when the room is off and when pressed will
activate the first lighting scene.
1. This screen is displayed when
the room lighting is OFF, and the
screen IR proximity sensor has been
activated
2. If the LIGHTS ON screen is not
pressed, it will dim and then go
dark after a set period of time. This
timeout can be adjusted within the
MENU>SCREEN setup
3. The FRESCO logo page will display
when the screen goes into time out.
4. The LIGHTS OUT and/or the
FRESCO logo screen settings can
be set to "not display" if desired.
This change is made within the
MENU>SCREEN setup
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com © 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. 08/17/15
2 of 27
Advertisement
Need help?
Do you have a question about the Fresco Touchscreen and is the answer not in the manual?
Questions and answers
Panel is frozen
To fix a frozen Acuity Controls Fresco Touchscreen panel, you can perform a system reboot using the RESET function. This can be accessed in the Setup > About section of the system menu.
This answer is automatically generated
How do we separate ballroom 1 and 2 on the Touchscreen?